i have this lcd sanyo 42849 it will power on i have the green stand by light and i can turn it on and off with the power button !! when i power it up there is no back light and it starts the "recycling clicking " i have reading at the connectors on power board ,24 going it inverter boards. 24.9 /12.0/5.0/4.9/ top r of power supply going to (main/analog) but i get no readings on that side the connector with the red/blue /white/blk wire i have 7.7. im leaning to the main cause i have no readings , but the power supply is doing the recycling clicks ??? any help out there
Comment