LG 42PQ3000- no video/audio -flashing d201?

Cornboats

Dave

Join Date: Oct 2010

Posts: 232

Country: United Kingdom
#1

LG 42PQ3000- no video/audio -flashing d201?

11-04-2012, 04:42 AM

I found 2 fets on the z sus were short. Changed the board but still the same. Changed the Y-sus, y drv,main board but no difference.

I'm down to control board and x boards. The control board has an led D201 which flashes on start up. 4 quick followed by 1 long. Stops after 5 minutes.

Would you happen to know what this code is? There is nothing in the service manual.
Tags: None

Previous template Next

HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen

by m1ch43lzm

Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-12-2025, 08:37 PM
LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update

by Hakuu

Hi There,

This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

More Details

TV Model - LG OLED77G1PUA

Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
- Channel: Troubleshooting TVs and Video Sources
07-12-2023, 02:37 PM
ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap

by H34TO

Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-17-2025, 07:17 AM
TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board

by howardc64
All left and right refers to looking from rear of TV (or looking from front with TV upside down)
- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
...
- Channel: Troubleshooting TVs and Video Sources
07-24-2025, 05:17 PM
JBL Flip Essentials - Bluetooth not connecting after a fall - video of board

by Aimbit

video: https://www.youtube.com/watch?v=S-xBu7m6SwE

Hi all. I was given this JBL Flip Essential speaker that 'fell from about 8 feet' and then the bluetooth would no longer function. It seems to power on normally and responds to button presses, but it will not showup on bluetooth for any device I try to connect to it.

The bluetooth daughter board has a 26mhz oscillator that I could not get to read the proper frequency so I tried replacing that to no avail. Thought maybe something was wrong with the bluetooth IC it's connected to, so I tried replacing that as well. None...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
10-28-2024, 09:29 PM
Loading...
No more items.

LG 42PQ3000- no video/audio -flashing d201?

LG 42PQ3000- no video/audio -flashing d201?

Related Topics