Technika LCD32-407B Shuts off after 40 mins.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gilly1984
    Badcaps Veteran
    • Jun 2012
    • 751
    • UK

    #1

    Technika LCD32-407B Shuts off after 40 mins.

    Friend brought this round asking me to take a look, she said it turns off after 40 minutes and wont switch back on for a while.

    I opened it up and found 2 bloated caps 1 of which was beginning to leak.

    Replaced them and it has now been on non stop for 4 hours.

    This is just in case someone has a similar problem.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Do NOT touch heatsinks when testing for voltages as they may be LIVE!
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Technika LCD32-407B Shuts off after 40 mins.

    Nice easy fix, what caps did you use as replacements? Would recommend replacing all of the similar green Samxons, known bad caps.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271

      #3
      Re: Technika LCD32-407B Shuts off after 40 mins.

      Samxon GF, a "known" bad series.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

      Comment

      • gilly1984
        Badcaps Veteran
        • Jun 2012
        • 751
        • UK

        #4
        Re: Technika LCD32-407B Shuts off after 40 mins.

        I replaced them with salvaged Rubycons lol. I know i should buy new but i had them lying about.

        35v 1000uf and 25v 1000uf.
        Do NOT touch heatsinks when testing for voltages as they may be LIVE!

        Comment

        Related Topics

        Collapse

        • berriferous
          Samsung PN43E450A1FXZA (Plasma) - Display up for 4 mins, then shuts itself down
          by berriferous
          Set was manufactured in 2012. I'm trying to diagnose where the problem is. I am assuming it is over-currenting after heating up? Display looks fine until it decides to shutdown. If I keep turning it on, it will eventually refuse to power up and requires unplugging to get it to respond again.

          I originally thought there would be some easily detected bad electrolytic capacitors, but I don't see the telltale signs. There might be some very minimal bulging on one of the x buffer board. BN96-22092A (LJ92-01852A).

          If I unplug the power feed to the X/Y board (LJ92-01854B), the...
          12-16-2024, 09:58 AM
        • huzo
          HP Omen shuts down when loading OS
          by huzo
          The model is 15ec-1061nm
          Board number is DAG3EDMB8D0​

          SO i turn the laptop on , and as soon as it starts booting from disk, from usb, windows,linux,HBCD,anything i boot it just turns off....while in bios menu or in linux boot menu it stays on normally...It's like when it starts to use graphics it shuts down...But i measured 0.72V while working on the GPU power line,no excess heat is comming from GPU or CPU, i even removed the heatsink and turned the laptop on and everything worked fine, got a bit hot, fan span to full speed, but it worked like that for few minutes in bios...
          10-29-2024, 12:05 AM
        • Giggle2562
          Lenovo V15-IIL motherboard swap (in V15-IKB) shuts down when internal display is connected
          by Giggle2562
          Hello everyone,

          I have a Lenovo V15-IKB that had a damaged motherboard. I replaced it with a motherboard from a Lenovo V15-IIL.

          The board powers on, but it shuts down after about 10-15 seconds. This only happens when the internal display (LCD panel) is connected.

          Here's what I've tried so far:
          • When the internal display is disconnected, the laptop works perfectly fine via HDMI.
          • The laptop shows an image on the internal display for a few seconds before it shuts down.
          • I tried swapping the LCD panel with a known good one.
          • I tried swapping the LCD cable
          ...
          11-06-2025, 12:36 PM
        • riko 656
          Lenovo Legion Slim 5 16APH8 (RTX 4070) - Turns on for a few seconds then shuts off. BIOS issue.
          by riko 656
          Hello everyone,
          I need help with my Lenovo Legion laptop. It turns on for a few seconds and then immediately shuts down. I believe this is a BIOS corruption issue.
          Laptop Model:
          • Model: Lenovo Legion Slim 5 16APH8
          • GPU: NVIDIA GeForce RTX 4070
          • Main BIOS chip size: 32MB
          • VBIOS chip size: 16MB
          Problem Description: The laptop was working perfectly. Now, when I press the power button, the keyboard lights up and the laptop powers on for just a few seconds, then it shuts itself off completely. After researching, I am convinced it's a corrupt BIOS.
          What I Have Tried So Far:
          1. I
          ...
          11-04-2025, 05:14 AM
        • brav1ez
          ASUS FX505GD shuts off after POST — no BIOS, power button unresponsive
          by brav1ez
          Hello everyone,
          I have an ASUS TUF Gaming FX505GD that's powering on, showing the ASUS logo for about 2 seconds with keyboard backlight, then immediately shuts off. After it shuts down, the power button does nothing until I unplug the laptop completely. No fans spin afterward either.

          I’ve tried:
          - CMOS reset
          - Removing the SSD/HDD
          - Reseating RAM (removing each stick individually stops boot completely)
          - Cleaning up recently applied thermal paste around CPU/GPU and nearby VRM components (issue persists)

          With...
          09-07-2025, 10:47 AM
        • Loading...
        • No more items.
        Working...