PN51E450A1FXZA-Best Picture settings

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • buuhaahaa
    Member
    • Aug 2012
    • 22
    • US
    #1

    PN51E450A1FXZA-Best Picture settings

    While waiting on parts to fix my 52" Sharp Aquos I found a Samsung 51" Plasma PN51E450A1FXZA on Craigslist for $300.

    New 51" Class (50.72" Diag.) Plasma 450 Series TV
    ( http://www.samsung.com/us/video/tvs/...50A1FXZA-specs )

    Manufacturer: Samsung
    Category: Samsung flat-panel tvs
    Part Number: PN51E450A1FXZA
    Release Date: March 20, 2012 (5 months ago)

    I was wondering if anyone would know the best picture settings for this TV?
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: PN51E450A1FXZA-Best Picture settings

      I would avoid Samsung plasmas like the plague! Compared to your Sharp, they are really, really poorly built and will fail.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • buuhaahaa
          Member
          • Aug 2012
          • 22
          • US
          #3
          Re: PN51E450A1FXZA-Best Picture settings

          Hehehehe at least it's working........waiting on ShopJimmy to approve a swap for the fried T Con board that they sent me. My Aquos is still sporting a negative picture effect LOL.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: PN51E450A1FXZA-Best Picture settings

              OK, just remember it's only 720p.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • TR103
                  Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                  by TR103
                  Hi, I have a Samsung UE50TU with:
                  - sound and backlight, but no picture
                  - when it arrived, it had a picture for a few seconds
                  - it keeps rebooting
                  - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                  - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                  - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                  - without cable between mainboard and lcd panel and with a jumpered...
                  01-22-2025, 04:12 PM
                • JJAAMM
                  SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                  by JJAAMM
                  This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                  Problem
                  TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                  07-06-2023, 06:01 AM
                • Mgiffune
                  Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                  by Mgiffune
                  I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                  I ordered a supposedly ‘new' Tcon board this time, and                  ...
                  06-09-2024, 10:28 AM
                • Dodgethis
                  Samsung QN75Q6DRA, No Picture, Has BL, and Sound
                  by Dodgethis
                  Hello all,

                  This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
                  5 Photos
                  09-11-2024, 07:39 AM
                • YellowJacket
                  Samsung QE55Q60RAT - no picture
                  by YellowJacket
                  Hi friends,

                  a friend of mine gave me this TV to fix, with common SAMSUNG TV issue - damaged panel. Turning on, sound is present, but no picture. So I went directly to standard process, connecting two pads together with a wire ( see in the picture ), and then removing flex cables. With right flex connected, there was half screen working, but still no picture ( disappearing colors and similar weird stuff ) + working sound. With left flex connected, TV is restarting + working sound. I supposed, left side is damaged, so I then blocked all 8 CLK pins ( going from 0R resistors on the second...
                  07-30-2024, 01:31 PM
                • Loading...
                • No more items.
                Working...