Magnavox 42mf237s/37

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AznPersuasion
    New Member
    • Apr 2012
    • 3
    • United States
    #1

    Magnavox 42mf237s/37

    Hello everyone. I have a strange issue here.
    I have a 42MF237S/37 with a power supply issue. Ordered a new one from shopjimmy.com (996500045386) but when I got it, I noticed the headers were in a different location than the old one (996510010206) that was in it. I had to splice and extend the cables to get them to attach to the headers. Does anyone know if these two power supplies are compatible? The PCB is the same shape, mounts right up and everything. I have tested my work on the cables and all of the connections are good (used the continuity setting on my meter). Help!
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Magnavox 42mf237s/37

      To me, they look completely different - are you sure they're compatible?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • tonybig10
          Magnavox MDR515H/F7 And Magnavox MDR537H/F7
          by tonybig10
          Hi is any one can help me on getting the Schematics for Magnavox MDR515H/F7 And Magnavox MDR537H/F7 PDF file thank you I really appreciate it. Just need to change some component on
          the main board and the power supply board. I looked all over for the internet and I cannot find the Schematics sheet for both of them. I don't know where else to look I hope someone can help me...
          03-07-2025, 01:03 PM
        • kalemaroni
          Splice DC jack from one Alienware model to another
          by kalemaroni
          I waited 5 days for this to arrive only to find it's not the right model! Rather than wait for a China order, I was wondering if anyone knew if it was possible to cut and splice/solder anywhere?

          12 pins vs 10 pins, it's a for a Dell AlienWare x15 R2 (P111F003) and the one advertised on eBay was Dell Alienware 15 R1 R2 R3 AW15R1 AW15R2 DC IN Power Jack 0784VK DC30100TN00.

          Also, there seem to be 4 wires soldered to the back of the jack on the X15 R2 and only 3 on the 15 R2. What would the 4th one be?

          ​...
          5 Photos
          05-29-2024, 07:43 AM
        • Tr0ll
          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
          by Tr0ll
          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

          Original T-con:
          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

          First replacement T-con:

          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
          10-07-2023, 07:48 PM
        • japlytic
          Certain "Class 2" HDMI cables can be marginal at 4K 60 Hz
          by japlytic
          For some time, a "Class 2" HDMI cable (part number BN39-01583B) supplied with a Samsung 4K 60 Hz display sometimes causes the display to overlay a few horizontal lines of flickering pixels of random colours and sometimes drops out, particularly on content requring HDCP.
          Since changing the cable to a thicker Class 2 unit, this problem has not occured again - do you know of other marginal "Class 2" HDMI cables supplied with displays?
          09-06-2023, 08:50 PM
        • sudz28
          Magnavox 27MS5402/17 CRT - no picture, flashing green light
          by sudz28
          I'm going to assume my beloved Magnavox CRT is toast, but also figured maybe this was a good opportunity to dip my toes into he circuitry waters and maybe learn something new. Also, I don't want to trash it if it's a fairly cheap/easy fix!

          My 20-year-old Magnavox has gotten me and my kids through many a gaming console change and worked great up until the other day. Following a long distance move, it sat in our garage for a year and now that I brought it in and turned it on I get no picture; instead, a green light blinks on the front of it; 7 flashes, one long flash, then 3 more...
          02-08-2022, 10:09 AM
        • Loading...
        • No more items.
        Working...