Blu-Ray player sluggish on dual-layer titles, but not on single-layer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    Blu-Ray player sluggish on dual-layer titles, but not on single-layer

    On a Blu-Ray player, I find that dual-layer Blu-Ray titles are a bit sluggish, even though the video plays back flawlessly, but single-layer titles are fairly quick.
    This is for a Chinese-made Blu-Ray player (budget brand sold by a major retailer) from around 2010, but sluggishness (even a brief pause between layer transition)on dual-layer Blu-Ray titles can be an issue that mainly affects early-generation players.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Blu-Ray player sluggish on dual-layer titles, but not on single-layer

      Dirty laser?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • ben7
          Capaholic
          • Jan 2011
          • 4059
          • USA
          #3
          Re: Blu-Ray player sluggish on dual-layer titles, but not on single-layer

          Maybe the video processor clock is too slow?

          It might also have to do with how the video processing circuits are laid out.
          Muh-soggy-knee

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Xenon-Codex
              Yamaha Bluray players
              by Xenon-Codex
              Got two Yamaha blueray players to check (they were going to e-waste), the other don't start at all (bulged caps in the PSU) and the upper one starts but the display is very dim. Which one is better unit? ...
              08-02-2024, 11:20 AM
            • howardc64
              MBP A1989 Touch Bar sometime sluggish touch response
              by howardc64
              Had flickering touch bar display. Replaced. Now have an intermittent touch reponsiveness. It generally works but sometimes a press would not respond and need to touch again... sometimes more than 1-2x. Generally happens when trying to go faster on the touch bar and seem more common in certain regions on the bar.

              Closer inspection reveal L5100 (touch sensor power rail coil) had overheated in the past. Perhaps it can't supply voltage or current properly. Don't have component available so thinking just replace with 0.1mm wire. Touchbar works now but touchbar just have some sluggishness...
              07-24-2024, 01:42 PM
            • Document Archive
              AMD Radeon R7 340 / R7 430 Schematic & Board View
              by Document Archive
              AMD Radeon R7 340 / R7 430 Schematic & Board View

              The Radeon R7 340 OEM was a graphics card by AMD, launched on May 5th, 2015. Built on the 28 nm process, and based on the Oland graphics processor, the card supports DirectX 12. Even though it supports DirectX 12, the feature level is only 11_1, which can be problematic with newer DirectX 12 titles. The Oland graphics processor is a relatively small chip with a die area of only 77 mm² and 950 million transistors. It features 384 shading units, 24 texture mapping units, and 8 ROPs. AMD has paired 2,048 MB GDDR5 memory with the...
              10-01-2024, 12:36 PM
            • pb1911nt
              820-4924-A Runs suspiciously slow - what could you measure?
              by pb1911nt
              Hi

              I have now a 820-4924 (with a i7 and 16GB).
              I would like to get the device working again for me.

              The Problem is the Device comes to me with a "dead" ssd. I tested on a other 820-4924 (i5-8gb) board and the MAC OS Installation stopped working with this SSD.
              Well i hope/guess its was a easy peasy Fix - New SSD And its working again.. But No!

              I don't know exactly how the procedure should start. But the LCD panel goes dark - then the "chime"(?!) sound comes and only 2 or 3 seconds later the apple comes.

              it doesn't...
              10-27-2025, 08:48 AM
            • Gumboil
              Denon AVR-X2000 no sound
              by Gumboil
              Good day all

              My first post on the forum, tried to find a introduction page, but couldnt. So thank you for having me here.

              After spending most of the past 2 days Googling and watching Youtube videos, I came across the forum, in the hopes that I could get some assistance with the above mentioned amplifier. As I do most days, I switched the unit on yesterday morning, got the relay clicks as per normal, but no sound from any of the speakers. Tried "Audio Direct' and the same issues there. In a panic state, I did a factory reset, without any luck. Then disconnected all...
              06-08-2025, 02:43 PM
            • Loading...
            • No more items.
            Working...