sound problems on vizio p42

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kmcbride1981
    Member
    • Dec 2011
    • 14

    #1

    sound problems on vizio p42

    delete
    Last edited by kmcbride1981; 01-17-2012, 09:45 PM.

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • ggil44
    Vizio M65-E0 No Picture, No Sound
    by ggil44
    Hi I inherited a Vizio M65-E0 that isn't working. It must have been dropped on the corner because I found that the infrared circuit had a capacitor with one end broken off of the board and some green corrosion around the plug to the main board. I re-soldered the capacitor and cleaned the corrosion well and tried turning the M65-E0 on and I was successful. My problem is that while the back lights come on and appear to perform local dimming there is no picture or sound. It kind of looks like you are looking at the TV through a very dense fog, where changing the input on the remote will change bright...
    09-03-2024, 08:30 PM
  • LEECH666
    Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
    by LEECH666
    Good day ladies and gentleman!

    I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

    This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

    I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
    01-19-2024, 05:46 PM
  • valente222
    LAPTOP HP 15-DY2059LA / i3-12gen has stability problems in vccpu coils, BUZZING SOUND. ¿Coil whine?
    by valente222
    Hello friends, I just received this equipment, it has a strange hum on the board. The computer works fine, outputs an image and starts Windows. But the problem is when charging the battery, a constant loop to charge. In short, it never charges the battery. When the charger is connected, the stability of the CPU is stressed and it seems that the coils make that electrical sound louder. This board is modern and I don't have a schematic. I have checked with a microscope and the pcb is completely new. Has anyone had this happen to them before? defect in driver ic?...
    11-18-2024, 03:21 PM
  • howardc64
    Vizio M557-G0 1/2 panel VGHD LC1 (and maybe XON VSSQ LC2) Problems
    by howardc64
    Failure Symptom

    No Display. Just random blocks of grouped vertical red lines.
    Disconnect right 1/2 panel (rear view), left 1/2 displays properly

    Masking T-Con Signal Diagnostic

    Reduced masking to 5 signals on right 1/2 panel and get perfect picture

    Pins are

    1 GND
    2 VGHD
    3 XON
    4 VSSQ
    5 LC2
    6 LC1

    VGHD and LC1 masking is absolutely necessary to get working panel. Didn't unmask 3-5 individually.

    Pictures and Schematic

    XON, LC2, LC1 are on AUO s302-21 32pin QFN...
    10-14-2024, 01:30 PM
  • Loading...
  • No more items.
Working...