Hello All.
I just joined, and I've read a ton of posts already about a similar model TV here on the forums already.
I've got this toshiba LCD HDTV, and a bad power supply.
No idea what happened to this. I got it from a girl's frat house.
Pulled the cover and checked for bad caps. I know a visual inspection isn't the end-all be-all, but nothing seems out of sorts.
There does seem to be a whining / high-pitched squeal coming from the HV side of the power supply at the end. (See pic with highlights.)
I've tested this board to this end only. I can get 12v from part A, and I do not get 24v from the inverter hookups.
I've replaced the Cap at C820, as when I tested it with an ohmmeter, it registered no resistance. (The new one tested fine with 4 ohms, then to almost 0, then starting "charging")
Also, the second fuse was popped. I've also replaced that part.
In reading the other post,
https://www.badcaps.net/forum/showpo...4&postcount=34
I see someone else had a problem with R850. Now I do not know how to test a fused resistor. I put leads on it and checked with all the ranges, but I get nothing. The little resistor only says it's 1.8 ohms, so I'm guessing it should at least something.
Regardless, it appears that something has broken and is not feeding power to the 24v side of the board. What that could be confuddles me, and my limited experience diagnosing electronics has become apparent.
Any help? I would like to learn how to test this resistor, but if something else seems obvious, please; by all means...
I'll post pics in the next post.
I just joined, and I've read a ton of posts already about a similar model TV here on the forums already.
I've got this toshiba LCD HDTV, and a bad power supply.
No idea what happened to this. I got it from a girl's frat house.
Pulled the cover and checked for bad caps. I know a visual inspection isn't the end-all be-all, but nothing seems out of sorts.
There does seem to be a whining / high-pitched squeal coming from the HV side of the power supply at the end. (See pic with highlights.)
I've tested this board to this end only. I can get 12v from part A, and I do not get 24v from the inverter hookups.
I've replaced the Cap at C820, as when I tested it with an ohmmeter, it registered no resistance. (The new one tested fine with 4 ohms, then to almost 0, then starting "charging")
Also, the second fuse was popped. I've also replaced that part.
In reading the other post,
https://www.badcaps.net/forum/showpo...4&postcount=34
I see someone else had a problem with R850. Now I do not know how to test a fused resistor. I put leads on it and checked with all the ranges, but I get nothing. The little resistor only says it's 1.8 ohms, so I'm guessing it should at least something.
Regardless, it appears that something has broken and is not feeding power to the 24v side of the board. What that could be confuddles me, and my limited experience diagnosing electronics has become apparent.
Any help? I would like to learn how to test this resistor, but if something else seems obvious, please; by all means...
I'll post pics in the next post.
Comment