Samsung lcd #LN-S3241D.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SEAWOLF
    Senior Member
    • Nov 2011
    • 177
    • Barbados West Indies.

    #1

    Samsung lcd #LN-S3241D.

    I recently received a Samsung lcd modle#ln-s3241d which has a dimly lit
    screen with no picture but has good sound. When any of the buttons on the
    remote control are pressed there is no display on the screen. I do not have a
    service manual this tv.Can anyone offer a solution for this problem?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Samsung lcd #LN-S3241D.

    T-con fuse is blown. I see it often. Dead easy to repair too. You just need a new fuse, a soldering iron and some solder...
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • SEAWOLF
      Senior Member
      • Nov 2011
      • 177
      • Barbados West Indies.

      #3
      Re: Samsung lcd #LN-S3241D.

      I have examined the T-CON board, but I do not see a fuse on this board.
      The board's ID# is V320B1-Lo1-c. Can anyone say where the fuse is located
      on this board?

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Samsung lcd #LN-S3241D.

        Post a pic. It's tiny, usually green, and right next to the main connector. If there is no fuse, then the T-con itself is toast, but at least T-cons are pretty cheap.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Village Electronics
          OldPro
          • Apr 2011
          • 118

          #5
          Re: Samsung lcd #LN-S3241D.

          Originally posted by tom66
          T-con fuse is blown. I see it often. Dead easy to repair too. You just need a new fuse, a soldering iron and some solder...
          If you see it "often" does it "often" repair the TV? If so do you count those as repairs and add them to your total of items you have repaired so far?

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Samsung lcd #LN-S3241D.

            Originally posted by Village Electronics
            If you see it "often" does it "often" repair the TV? If so do you count those as repairs and add them to your total of items you have repaired so far?
            I've seen it once myself (and repaired it in that case) + many others on this forum (maybe 90% success rate)... and yes I need to update that list (getting unwieldy and have lost track)... and I'm an amateur. It seems to be a Samsung thing to put fuses on the T-con. I've also seen fuses on plasma TVs blow and replacing them fixes the problem immediately, maybe some kind of thermal stress blows them.
            Last edited by tom66; 12-28-2011, 08:43 AM.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • SEAWOLF
              Senior Member
              • Nov 2011
              • 177
              • Barbados West Indies.

              #7
              Re: Samsung lcd #LN-S3241D.

              Originally posted by tom66
              Post a pic. It's tiny, usually green, and right next to the main connector. If there is no fuse, then the T-con itself is toast, but at least T-cons are pretty cheap.
              Here is pic. of T-con board.#V320B1-L01-C.
              Attached Files

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Samsung lcd #LN-S3241D.

                Need a closer and in focus pic around this area.
                Attached Files
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • start2011
                  Member
                  • Dec 2011
                  • 30

                  #9
                  Re: Samsung lcd #LN-S3241D.

                  Originally posted by SEAWOLF
                  Here is pic. of T-con board.#V320B1-L01-C.
                  https://www.badcaps.net/forum/attach...1&d=1326077769
                  Attached Files

                  Comment

                  • SEAWOLF
                    Senior Member
                    • Nov 2011
                    • 177
                    • Barbados West Indies.

                    #10
                    Re: Samsung lcd #LN-S3241D.

                    Originally posted by tom66
                    Need a closer and in focus pic around this area.
                    Here is a closer focus pic around this area.
                    Attached Files

                    Comment

                    • seaboy
                      New Member
                      • Jan 2012
                      • 2

                      #11
                      Re: Samsung lcd #LN-S3241D.

                      Hello! When I encountered this problem also. TV works only sound. No picture on the screen.
                      It was a blown voltage of the T-con board. Mark I have the picture. I hope I was useful information.

                      V320B1-L01-C

                      Last edited by seaboy; 01-19-2012, 11:48 AM.

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #12
                        Re: Samsung lcd #LN-S3241D.

                        I recently received a Samsung LCD with a failed voltage regulator; it had very similar symptoms except there were some thin lines down the middle of the screen.

                        I can't see a fuse. Are there any components with designator F on the board?
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • seaboy
                          New Member
                          • Jan 2012
                          • 2

                          #13
                          Re: Samsung lcd #LN-S3241D.

                          This does not fuse, it is a regulator / stabilizer / voltage.

                          Comment

                          • tom66
                            EVs Rule
                            • Apr 2011
                            • 32560
                            • UK

                            #14
                            Re: Samsung lcd #LN-S3241D.

                            Originally posted by seaboy
                            This does not fuse, it is a regulator / stabilizer / voltage.
                            Yes there are two potential causes (among others); the fuse, and the regulator.
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment

                            • SEAWOLF
                              Senior Member
                              • Nov 2011
                              • 177
                              • Barbados West Indies.

                              #15
                              Re: Samsung lcd #LN-S3241D.

                              Originally posted by tom66
                              I recently received a Samsung LCD with a failed voltage regulator; it had very similar symptoms except there were some thin lines down the middle of the screen.

                              I can't see a fuse. Are there any components with designator F on the board?
                              There is a fuse #f1 which is located near CNF2 on T-CON board #V320B1-L01-C.
                              Attached Files

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK

                                #16
                                Re: Samsung lcd #LN-S3241D.

                                Check the fuse for continuity. Set your meter to ohms and probe both sides. You should get nearly zero ohms.
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment

                                • SEAWOLF
                                  Senior Member
                                  • Nov 2011
                                  • 177
                                  • Barbados West Indies.

                                  #17
                                  Re: Samsung lcd #LN-S3241D.

                                  Originally posted by tom66
                                  Check the fuse for continuity. Set your meter to ohms and probe both sides. You should get nearly zero ohms.
                                  I have checked the fuse already and it is good.

                                  Comment

                                  • tom66
                                    EVs Rule
                                    • Apr 2011
                                    • 32560
                                    • UK

                                    #18
                                    Re: Samsung lcd #LN-S3241D.

                                    I would replace the T-con anyway, as it is the #1 cause of this problem.
                                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                    Comment

                                    • khalidtv
                                      New Member
                                      • Jun 2012
                                      • 1
                                      • france

                                      #19
                                      Re: Samsung lcd #LN-S3241D.

                                      Hello, please out voltage t-con V320B1-L01-C. VGL-VREF-GVOFF-GVON-VGM-VCM-V33G-V5V-VDA-V33V.
                                      THANK YOU.

                                      Comment

                                      • g.pol
                                        Member
                                        • Dec 2012
                                        • 17
                                        • greece

                                        #20
                                        Samsung le32r71b

                                        hi
                                        experiencing the following problem with a tv samsung LE32R71B
                                        watch the video:
                                        https://www.youtube.com/watch?v=tbB1EhkctSI
                                        check the power supply and even preventive changed all capacitors.
                                        It's okay.
                                        The model of the power supply is PSLF201501B
                                        T-con board:V320 B1 L01 C (I checked the fuse, is OK)
                                        I read, that the problem is due to the board(t-con).
                                        What percentage of valid self;
                                        Please anyone who knows anything about the problem, let us help.
                                        THANKS
                                        George from GREECE





                                        Attached Files
                                        Last edited by g.pol; 02-18-2013, 08:21 PM.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • RogerH58
                                          Samsung 46" TV LE46B530 blowing fuse
                                          by RogerH58
                                          Hi all,

                                          I am a newbie and not very experienced so bear with me if i struggle sometimes with technical language - but I'll do my best. I searched "Samsung" and the model number on the forum but didn't find anything I could understand!

                                          I'm not an electronics guy - just picked up stuff over the years through my flight-simming hobby.

                                          I have the above mentioned 46" tv as the monitor for my flight-sim setup. Recently it went "crack" and stopped working. No standdby light and no response. I assumed a fuse had blown and after investigation...
                                          06-10-2023, 10:27 AM
                                        • corrize
                                          A funny fuse story – Lumix LX100 II
                                          by corrize
                                          Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
                                          I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
                                          The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
                                          There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
                                          And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
                                          10-19-2023, 09:58 AM
                                        • triplefour
                                          Samsung UN55ES7003 has blown fuse on TCON and short to ground.
                                          by triplefour
                                          Samsung UN55ES7003
                                          made house call.
                                          red power led comes on, blinks twice, no display, no backlight, relay clicks, repeat.
                                          psu has self test feature.
                                          disconnected from mainboard.
                                          determined PSU ok BL ok.
                                          suspect mainboard.
                                          disconnecting tcon has no change on operation.
                                          markings on mainboard:

                                          BN97-06531P 0151
                                          BN94-06123R

                                          found and ordered replacement on ebay https://www.ebay.com/itm/394077328633
                                          for 54$

                                          second house call:
                                          with replacement mainboard, tv turns on, has sound,...
                                          07-13-2022, 03:53 PM
                                        • Chrissygizmo
                                          Samsung ue55hu8500t tcon board fuse blowing
                                          by Chrissygizmo
                                          Hi , I've got a Samsung UE55HU8500T that has sound but no picture, I've had it open and done a quick check of voltages etc, I found that the F2 fuse on the tcon board had blown (T-CON BOARD VD_STV5565EU22BC6LV0.3 -) so I replaced it with a similar value fuse but still nothing, ten I noticed the replacement fuse had blown too . I would appreciate any help with this. Thank you in advance...
                                          04-28-2021, 11:15 PM
                                        • sinip
                                          Samsung Syncmaster T220 blown green fuse F301
                                          by sinip
                                          I replaced some capacitors in this one a long time ago, and it was working OK until it again developed a "slow start" in cold weather, especially. Once it started, all would be well.

                                          So, while it was trying to start, I've heard something getting fried inside, and after opening it, I found 4A green fuse F301 blown. Now, I'm measuring short across the C301 capacitor (1000uF/35V, it is good itself, of course).
                                          MOSFETs in the inverter are STM8139 (U302 and U303) and have no visual sign of being burnt. I don't see anything else burnt, either.

                                          Now, I downloaded...
                                          05-21-2023, 02:30 PM
                                        • Loading...
                                        • No more items.
                                        Working...