g.pol
Member
Last Activity: 09-14-2024, 12:27 AM
Joined: 12-05-2012
Location: arcadia
-
LG55UF8700 DISPLAY PROBLEM
Hello.
I would like your opinion about this particular television.
For a few days now, horizontal lines appear at the bottom of the screen every 3 seconds.
I have the impression that it is the T-con board. -
Re: Eeprom dump thread!
Hello
with which programmer can I read the eeprom 24G256, from the TV LG 55UF8007-ZA (EAX66165204)
can CH341A read?
thanksLeave a comment:
-
Re: F&u fl32107 problem [tp.ms3663s.pb818]
finally with this version the file went through and the TV worked.
thank you very much for the valuable help.Leave a comment:
-
Re: F&u fl32107 problem [tp.ms3663s.pb818]
Thanks for the file, which i went through but the problem remains. i used the ch341a programmer and the neoprogramer software after checking all the options in the programming button. what else could be wrong?...Last edited by g.pol; 03-25-2023, 11:38 AM.Leave a comment:
-
Re: F&u fl32107 problem [tp.ms3663s.pb818]
ok i uploaded it
thank you...Leave a comment:
-
F&u fl32107 problem [tp.ms3663s.pb818]
Hello
I have the TV which is waiting for the standby light, it does not accept a command either from the remote control or from the button.
The standby light is constantly waiting.
I suspect it eeprom chip (25Q64CSIG)
Where can I find the file to pass it?
Thanks -
Re: Eeprom dump thread!
sorry for the omission, i mean it eeprom
I would also like for the model LG 55UF8007-ZA ( eax66165204) (eeprom file)Last edited by g.pol; 03-24-2023, 02:47 PM.Leave a comment:
-
Re: Eeprom dump thread!
hi I need dump software for LG49UF853V-ZE (EAX 66165202)
THANKSLeave a comment:
-
Lg tv model 55uf8007-za
Hello.
I am looking for a used motherboard
Τhe cause of the problem is that the screen stays on the lg logo.
Αnd since I was informed, they told me that a new motherboard is needed.
can i use any other match?
is eax66165202 suitable?
(I don't care if it has satellite input)
Thanks...Last edited by g.pol; 10-29-2022, 09:18 AM. -
Re: LG 42" LCD 42LD550 will not turn on or turns itself off/on
hello.
measurements on capacitors CONNECTOR exit, and see that I have measurements kanonika.gia example measures 12 and 20 volts.
c205=3,5v
c218=13,4v
c210=20v
c220=20v
c215=3,5v
c208=?
c217=?
c219+13,4v
c204=3,5v
But CONNECTOR not, count only the 3.5 volts.
I suspect that is the Q203(FDD5614P) shows up in photo
What do you think?
And one last thing
Domestic to make the measurements,
The PCB...Last edited by g.pol; 03-12-2014, 04:43 AM.Leave a comment:
-
Re: LG 42" LCD 42LD550 will not turn on or turns itself off/on
Hi
Have problems with the power supply.
Burn safety!
A quick test I did locate a zener shorted the ZD503.
I do attempt to find the service manual of the power supply and can not find anything!
have no idea?
The code board is PCB: EAX61124201/15 REV 1.2
Thank you
edit:
hi
returns on the problem.
change the STRW6053N and the zener 5.1 volt.
not burn safety but now, than are measured at the terminal (CONNECTOR) board I only have 3.5 volts....Leave a comment:
-
Samsung le32r71b
hi
experiencing the following problem with a tv samsung LE32R71B
watch the video:
[url]https://www.youtube.com/watch?v=tbB1EhkctSI[/url]
check the power supply and even preventive changed all capacitors.
It's okay.
The model of the power supply is PSLF201501B
T-con board:V320 B1 L01 C (I checked the fuse, is OK)
I read, that the problem is due to the board(t-con).
What percentage of valid self;
Please anyone who knows anything about the problem, let us help.
THANKS
George from GREECE...Last edited by g.pol; 02-18-2013, 08:21 PM.Leave a comment:
-
Re: New Members - please post your introductions here
Hello
My name is George, I'm a new member.
I live in GREECE and more specifically from Tripoli in the Peloponnese.
Congratulations on your amazing website.
I hope we have excellent cooperation.
Leave a comment:
No activity results to display
Leave a comment: