Fahgetaboutit! Bought one off ebay...
-
Last edited by KTMLew; 12-18-2011, 06:18 PM.
-
I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.
At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked... -
Hi, I have an old Privileg brand 5.1 speakers. I have lost the remote control. I have an universal Harmony remote but there is no Privileg brand in it's software to add. Does anybody have an idea what alternative brand for a remote can I try instead? I'm attaching an image of what the speakers looks like. The image shows 2 main speakers, they are 5 + 1 in total. Thank you very much09-18-2024, 01:55 AM -
Hello Everyone,
Hope everyone is enjoying their repairs at hand!.
I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.
I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.
Please refer to the attached picture, i think the voltage divider is missing... -
I have a hitachi 75hl16t64u tv in for repair and it is driving me crazy.
It came in for a power issue which I have finally resolved by replacing the power supply.
The current issue is that the TV does not respond to the remote control. I have replaced the IR sensor board with a used one but the fault persists.
Anyone have a clue how to fix TV?
FYI: I have checked the remote work s by pointing it at my camera on my phone.... -
I managed to drop this recently. It fell flat and square onto the floor from about 1.8m. Can't remember if face up or face down.
The remote still kinda works but the display is blank and only shows up if I repeatedly flick the little silver crystal/oscillator looking thing on the board.
Not sure if this part is the culprit or if flicking it is moving something else, but it seems localised to that component as far as I can tell.
Having trouble working out the value of it since it doesn't seem to have anything other than a brand name printed on the side of it....