My father in law just gave me his maganavox 32 lcd tv that didnt work, after a little research i found that two caps on the power supply went bad so i replaced them and now the tv works. when i went to radio shack to get the cap i needed, 1200uf 25v, they didnt have them but they did have 1000uf 25v so i got those and installed them. like i said, the tv now works, but the pictur quality is not great, colors are not great and quality alost looks like a video from the internet, it has pixalation...woould the cap that i used have anything to do with the picture quality? thanks in advance...Ryan
-
-
Re: Magnavox 32 LCD Cap replacement
RadioShack caps will not work; you need low ESR ones. They will probably not be causing the problem though (but they will soon, when they die.)Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Magnavox 32 LCD Cap replacement
Got a link on where to get the correct one?Comment
-
Re: Magnavox 32 LCD Cap replacement
Digi-Key, search for Panasonic FC or Panasonic FM. (Favourites around here.)Originally posted by nugget68 View PostPlease do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Magnavox 32 LCD Cap replacement
If you are in the US, Digi-Key P14426-ND, Panasonic EEU-FR1E122L would be an option.Originally posted by nugget68 View Post
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Magnavox 32 LCD Cap replacement
Thanks...I will check it out...hopefully it will make my picture a little better...Comment
Comment