Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

[Jojesus]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

Hello

Please Have SM; DELTA DPS-199DP, ir Ref; for, BD701A, BD701B D701C, BD701D, BD701E, BD701F


Thanks
Jesus

[betalguise]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

Not sure if anyone on this forum might be able to help me, but I am looking for the value of two resistors on the DPS 199. They are R912 and R913, located next to the integrated circuit with the large V shaped heat sink. I was hoping to read the values off of the previously posted pictures, but the lighting angle is bad, so they are in the pitch black. If information on C913 is still needed, I would happily provide it!

Thanks in advance.

[Myers]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

i know this is a old thread but this info might help someone
c913 CAP IS LABELED LIKE THIS

BC
X7R
472K
1KV

and its yellow

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

There is a used non working one on Ebay and it has a make offer opiton.
http://www.ebay.com/itm/AS-IS-REPAIR...item19c9990447

I looked at the posting, it's for a S3 revision. I have the S2 revision.....

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I forgot to mention that it was on ebay. I just did a search for DPS-199ap and found a board that was $50 with $8.50 shipping.

That's for a "DPS-199ap b" model, the one I'm looking for is "DPS-199ap a"...Thanks for looking for me, really appreciate it....The power supply I have has a part # of 0500-0507-0180. I post the Revision wrong, it's S2, not just 2.....

[Dgtech]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I forgot to mention that it was on ebay. I just did a search for DPS-199ap and found a board that was $50 with $8.50 shipping.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

Don't buy a non working board for $18, wait a week for it, and still have the problem. If you just spend exactly $40 more ($50 Price $8.50 Shipping), you can get a working board. Just slap it in and go with it.

Your time at home is worth more than $40.

I've seen working one's for $40 to $70, but most of them are out of stock, if not all. There's ones that are $100 to $110, which is not what I want to spend. I would like to get the TV working asap, but I might just have to play the waiting game for it....

[Dgtech]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

Don't buy a non working board for $18, wait a week for it, and still have the problem. If you just spend exactly $40 more ($50 Price $8.50 Shipping), you can get a working board. Just slap it in and go with it.

Your time at home is worth more than $40.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

You might try sending the e-Bay seller a message. Explain to him your issue and ask him if he could either take a close up picture of the part and e-mail it to you or if he would read the information on the component in question. Hopefully you can get a response.

I was thinking about that. I give it a try. Otherwise, I'll probably buy it if the seller isn't willing to do that.

[jayoung]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I might have to buy it to have a reference board. I would glady buy a schematic drawing of the Power Supply Diagram for $10, if it was available..

You might try sending the e-Bay seller a message. Explain to him your issue and ask him if he could either take a close up picture of the part and e-mail it to you or if he would read the information on the component in question. Hopefully you can get a response.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

That looks more like someone cut it off... because ceramic caps do not just disappear like that with two little stubs of wire left.

If it really did explode, there should at least be fragments of it lying around.

I got the TV non functioning. It did look like it blew up, only a quarter part of the cap was left and I couldn't find the rest of it, with at least a label on it.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

Don't know if this will help out, but here's the back side of the PCB....

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

There is a used non working one on Ebay and it has a make offer opiton.
http://www.ebay.com/itm/AS-IS-REPAIR...item19c9990447

I might have to buy it to have a reference board. I would glady buy a schematic drawing of the Power Supply Diagram for $10, if it was available..

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I agree with b700029, unless you trimmed off the lead and there were more parts of it lying around, it looks like this was cut out deliberately.

It looks like this is part of the gate drive circuitry for the main SMPS. With the part numbers of the SMPS controller and the power FET we may be able to make an educated guess for the proper value.

Schematics for Vizios are hard to find. Many TV manufacturers turn to a subcontractor to design and provide the power supplies, schematics for those supplies are very hard to find.

PlainBill

Do you mean the Voltage Regulators(ie. Mosfet) on the heatsinks and the IC chips on the board? The ones in close proximity to the blown Ceramic cap.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

There is a used non working one on Ebay and it has a make offer opiton.
http://www.ebay.com/itm/AS-IS-REPAIR...item19c9990447

I did make an offer to it up to $15, but it get's auto rejected...Guess the seller should just put $18 buy now. lol

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I trimmed it off to clean up the area. The cap was so blown, only a fourth of it was left.

[alexanna]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

There is a used non working one on Ebay and it has a make offer opiton.
http://www.ebay.com/itm/AS-IS-REPAIR...item19c9990447

[PlainBill]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

I agree with b700029, unless you trimmed off the lead and there were more parts of it lying around, it looks like this was cut out deliberately.

It looks like this is part of the gate drive circuitry for the main SMPS. With the part numbers of the SMPS controller and the power FET we may be able to make an educated guess for the proper value.

Schematics for Vizios are hard to find. Many TV manufacturers turn to a subcontractor to design and provide the power supplies, schematics for those supplies are very hard to find.

PlainBill

[b700029]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

That looks more like someone cut it off... because ceramic caps do not just disappear like that with two little stubs of wire left.

If it really did explode, there should at least be fragments of it lying around.

[209ITek]

Re: Delta DPS-199ap a Rev:2 cap value for C913 location(For a Vizio L32 HDTV10A)

If you can read this, post larger pictures.

PlainBill

Hope these are better pictures.....I inspected the whole power supply board and the other components of the TV and they seem fine....Wish there was a more complete service manual of the Vizio L32 HDTV10A.....