Hp pl4260n help!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sdngs
    New Member
    • Apr 2011
    • 8
    #1

    Hp pl4260n help!

    hey guys.. my hp pl4260n plasma was working great one day and then the next i got this next day (see link). So this tv has been replaced and has been sitting in my basement with much thought of what to do with it. Until last month when my Samsung went out with a simular issue. On the Samsung i was able to replace the buffer boards and now that one is back un and running.

    http://www.youtube.com/watch?v=ES3n9F_ob6k

    So the question is: Can the HP PL4260n be fixed.?

    my thought is either the digital board or the buffer boards..

    Thoughts?

    Scott / swdoenges@yahoo.com
    Tags: None
    • rayrod81
      Badcaps Veteran
      • Oct 2010
      • 205
      #2
      Re: Hp pl4260n help!

      Yes it can be fixed. The problem looks at though the buffer board has gone. There is only on long buffer board on this one as it is the LG 42X3 panel. Pictures of the back of the TV will help you get more definitive answers or help in finding the problem.

        Comment

        • sdngs
          New Member
          • Apr 2011
          • 8
          #3
          Re: Hp pl4260n help!

          Here's a shot at the open backside of the Hp tv.. Looks as if the buffers are long the left side..

          thoughts on the best places to get repaired or replaced?

          see attached images
          Attached Files

            Comment

            • sdngs
              New Member
              • Apr 2011
              • 8
              #4
              Re: Hp pl4260n help!

              Here's a couple additional pics of the buffer boards..

              any help would be helpful and if anyone knows a great place to get some of these components

              Thanks!
              Attached Files

                Comment

                • sdngs
                  New Member
                  • Apr 2011
                  • 8
                  #5
                  Re: Hp pl4260n help!

                  bump

                    Comment

                    • reddiesel
                      Member
                      • Oct 2011
                      • 11
                      • UK
                      #6
                      Re: Hp pl4260n help!

                      Have you tried EBAY ?

                        Comment

                        • sdngs
                          New Member
                          • Apr 2011
                          • 8
                          #7
                          Re: Hp pl4260n help!

                          thoughts between either the buffer board and the YSUS main board, i've had one comment on anther board that it's NOT the YSUS board

                          thanks!

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • howardc64
                              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                              by howardc64
                              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                              ...
                              07-24-2025, 05:17 PM
                            • howardc64
                              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                              by howardc64
                              Problem

                              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                              08-04-2024, 10:36 PM
                            • Yanleb
                              Schematic or datasheet for Plasma TV buffer chip
                              by Yanleb
                              Hi all,

                              I'm interested in understanding how a buffer board chip is working. I know there's about 90 outputs per chip to the plasma panel, but I'm more interested to know about the input pins. I guess that some of them are address pins, but I want to know more.

                              So far I've found nothing at all. I haven't found any datasheet about the various buffer chips, and I haven't found any schematic for the buffer board using them (Y Buffer Board in Samsung's terminology).

                              Any information will make me happy. It can be from any buffer chip or plasma TV manufacturer....
                              05-18-2022, 01:36 PM
                            • legg
                              LG 42PC3 buffer output doesn't follow YSUS
                              by legg
                              LG42PC3D -UD originally with green lamp but no display or audio.
                              Owner says was working, then went 'pop'.
                              All 5V caps bulging. replaced.
                              All PSU output voltages within spec but -Vy is low on YSUS.
                              One of three parallel fets between SUS_OUT and SUS_DN is zenering,
                              eventually shorts DG. Replaced all 3 - -Vy now OK.

                              Y scan buffer test point does not follow YSUS output below -50V

                              Note: This unit seems to expect YSUS output to park at -Vy in between
                              drive signal pattern periods. A replacement drive signal board confirms this....
                              11-18-2021, 11:49 AM
                            • howardc64
                              Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
                              by howardc64
                              • Prior owner tried a replacement main board. No difference.
                              • Samsung 2x red blinking standby LED = panel fault
                              • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
                              • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
                              • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
                              ...
                              07-19-2025, 10:54 PM
                            • Loading...
                            • No more items.
                            Working...