hitachi 42hdx99 powers off and on automatically

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kameron1967
    New Member
    • Apr 2011
    • 3

    #1

    hitachi 42hdx99 powers off and on automatically

    Hi.

    I wonder if someone could tell me what's wrong with this tv. It keeps turning itself, then on again after 8 blinks, then repeats the cycle even after leaving it unplugged for a couple of days. I have attached the photos. Thanks.
    Attached Files
  • Dgtech
    E. Technician
    • Apr 2009
    • 1462
    • Steeler

    #2
    Re: hitachi 42hdx99 powers off and on automatically

    I dont work on plasma's but this sounds like a power supply problem to me. Post closer views of the power supply board (front and back) and I'm sure someone will help you out.
    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

    Comment

    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA

      #3
      Re: hitachi 42hdx99 powers off and on automatically

      Odds are it's trying to tell you it has a problem. The service manual might have the information on what 8 blinks mean.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

      Comment

      • mbates14
        Senior Member
        • May 2005
        • 169

        #4
        Re: hitachi 42hdx99 powers off and on automatically

        the pictures are pretty low-res, but from the looks of it, your Y-buffers appear to be integrated into the panel ribbons?? if thats the case, and one of those goes bad, the whole panel is toast.

        Comment

        Related Topics

        Collapse

        • nobbnobb1
          Panasonic TC-P50U50 Powers Off - 8 blinks
          by nobbnobb1
          Hello,

          I have a Panasonic TC-P50U50 plasma TV which powers on briefly, then powers off and flashes the power light with 8 blinks. This TV is infamous for this, of which the suggestion that the SS board has failed due to loose grounding screws and requires a replacement of the following components on the SS board:

          2x DG302 (Q16051)
          2x RF2001 (D16041)
          2x 5.6 ohm SMD resistor
          1x BD8694 IC

          I have already gone ahead and replaced these components, as well as cleaning off the ground connections on the SS board as well as the associated...
          03-21-2023, 08:33 PM
        • Biruslapio
          Panasonic P58V11B 8 and 12 blinks error "fix"
          by Biruslapio
          Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

          Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
          04-13-2021, 07:13 AM
        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

          TV Model: Panasonic TC-P55ST50
          ...
          11-20-2024, 08:52 PM
        • malogro
          Acer Nitro 5 AN515-55-55M1 [GH51G mb] powers on, no vcc_core
          by malogro
          Hello all,

          I'm stumped on this guy, so wanted to see if anyone has any further ideas:

          Intro:

          This is an Acer Nitro 5 AN515-55-55M1 with unknown prior history (bought "as-is" on eBay). It charges the battery and powers on from both AC adapter and battery, so I think this rules out main power issues.

          Upon attempt to boot, it will "reboot" (meaning powers down and then powers on again) only once, and then stays stuck in a status of lights on / no post / no monitor. Powering on with fn+esc maxes out the fans on first boot attempt,...
          04-14-2023, 04:44 PM
        • Julian Bailey
          HP ProBook 445 G8 Battery not charging
          by Julian Bailey
          Hi all

          We have in a HP ProBook 445 G8 laptop with AMD Ryzen 7 CPU. When power is connected the power LED light blinks 5 times then stops. Normally HP laptops will blink this LED 10 times as it does a self test when the AC adaptor is inserted. So there must be some sort of short somewhere.

          The battery doesn't charge, and is erratic on the MM voltage. Bench PSU LED pulsates when the battery is connected also. So the fault must be on the charging circuit?

          I have gone around the board with a MM and cant find anything

          Windows shows the battery fine,...
          10-11-2024, 10:34 AM
        • Loading...
        • No more items.
        Working...