Visio model VX42LHDTV10A problem

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • dossman
    Member
    • Feb 2011
    • 35

    #1

    Visio model VX42LHDTV10A problem

    I would get the Visio logo but no sound or picture and had to unplug set to turn it off. Paid $65.00 for a service call and the technician wrote down that the mainboard was bad. I removed the mainboard and power supply board and saw no signs of overheating and 4 of the 6 680uF caps on the power supply looked a little different on the top but still looked flat when viewed from the side. I did nothing more than inspect the boards then I re-installed them. Now when I turn the set on the screen is all black, before it was lite up with a white glow but now nothing. The only thing I think I might have done was short something when I removed the three white plastic plugs from the power supply board (they were very hard to get apart and I had to use a small screwdriver to pry them apart). Could I have shorted something even though the set was unplugged when I removed the boards for inspection? I would really like to get this set going as I have an old RCA 52" Projection that the converter chips are failing on so I wanted to go to a newer TV. I'm handy with a soldering iron and have a couple of ECM weller stations and have repaired many things in the past including TV's with bad capacitors but I do not have the funds to buy every board in this set. This TV is a Visio VX42LHDTV10A Thanks to all who can help me in this matter.
  • steve2
    Senior Member
    • Dec 2010
    • 121

    #2
    Re: Visio model VX42LHDTV10A problem

    Maybe one of those 3 connectors has a bent pin.

    Comment

    • dossman
      Member
      • Feb 2011
      • 35

      #3
      Re: Visio model VX42LHDTV10A problem

      I'll double check that Steve, but I'm pretty sure that all the pins lined up when I re-connected them. Thanks

      Comment

      Related Topics

      Collapse

      • fmajbour
        Acer Nitro 5 model A515-51 keyboard problem
        by fmajbour
        I have ACER Nitro 5 model AN515-51 main board model LA-E911P Rev 1A after replacing the mainboard keyboard stop working properly.
        Some keys not working like Q,Z,C and some keys show deferent chr$ if i press K i will get I press D for F4 key etc...
        i have tried all software issues like drivers test the keyboard on Windows 10 and Windows 11 and Linux with same problem.
        I have check the keyboard connector on the mainboard every thing looks ok.
        Then i replaced the keyboard with new one ......same problem exact same keys problem.
        I need your advice if anyone face...
        11-13-2023, 09:50 PM
      • Document Archive
        HP ProBook 640 G1 Base Model Notebook 600 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP ProBook 640 G1 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 640 G1 Base Model boardview and 640 G1 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
        09-06-2024, 05:27 AM
      • Document Archive
        HP EliteBook 840 G2 Base Model Notebook 800 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP EliteBook 840 G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G2 Base Model boardview and 840 G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
        09-06-2024, 05:27 AM
      • Document Archive
        HP ZBook 14 G2 Base Model Notebook 14 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP ZBook 14 G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14 G2 Base Model boardview and 14 G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
        09-06-2024, 05:27 AM
      • Document Archive
        HP ZBook 15u G2 Base Model Notebook 15 Specification for Upgrade or Repair
        by Document Archive
        This specification for the HP ZBook 15u G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 15u G2 Base Model boardview and 15u G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
        09-06-2024, 05:27 AM
      • Loading...
      • No more items.
      Working...