Sharp LC19SB25U

[hoadle]

I had Sharp LC19SB25U when plug power to TV the power red light flash, can't turn on when press power button
open & take some picture
check power at SC7501 (had 15 pins quick disconnect) connected from supply board to video card
at pins 9 had 3.279VDC & pins 13+14+15 had 11.81 VDC
Need servicer manual to find out what wrong of Sharp LC19SB25U
Thanks

[PlainBill]

Re: Sharp LC19SB25U

http://elektrotanya.com/?q=showresul...oria=&kat2=all

PlainBill

[hoadle]

Re: Sharp LC19SB25U

Thanks
PlainBill

[GSPA]

Re: Sharp LC19SB25U

I had Sharp LC19SB25U when plug power to TV the power red light flash, can't turn on when press power button
open & take some picture
check power at SC7501 (had 15 pins quick disconnect) connected from supply board to video card
at pins 9 had 3.279VDC & pins 13+14+15 had 11.81 VDC
Need servicer manual to find out what wrong of Sharp LC19SB25U
Thanks

I viewed your pics. I have my Sharp LC-19SB25U also opened. I am encountering the same issues. I would like to know if you have "servicer manual" to find out what's wrong with it. Also there is a fuse that one can change on it, but I can't seem to find it. Would you happen to know what I can change on it to fix it?

Thanks in advance.

[PlainBill]

Re: Sharp LC19SB25U

I viewed your pics. I have my Sharp LC-19SB25U also opened. I am encountering the same issues. I would like to know if you have "servicer manual" to find out what's wrong with it. Also there is a fuse that one can change on it, but I can't seem to find it. Would you happen to know what I can change on it to fix it?

Thanks in advance.

For a link to the service manual look here.

PlainBill

[GSPA]

Re: Sharp LC19SB25U

I am new at this guys. I saw that hoadle said that he "check power at SC7501 (had 15 pins quick disconnect) connected from supply board to video card at pins 9 had 3.279VDC & pins 13+14+15 had 11.81 VDC" can you tell me exactly where are those pins that you disconnected to test them. Also where is that fuse that I read up on that one can also change on the picture. In other words if you can pin point it. Thanks.