Re: LG 55LS4500 Sound but no picture
Thanks I bought T-Con board install The TV is working again
Thanks again
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Sanyo DP46848
Thanks for the replies, I had a digital multimeter "Fluke 189"
I check the mainboard to T-con about 12V to 19V. I think maybe the Tab Bonds or bad panel
Leave a comment:
-
Re: Vizio P42HDTV10A Plasma - No sound, picture, or voltages
"Also, one of the fuses was blown on the Z-SUS board. That was replaced with no difference in result." are you replaced new fuse or replaced new Z-SUS board?
I had Vizio P42HDTV10A same problem, find out Z-SUS board is bad, Mainboard tell Power Supply board to turn on ( you can hear click is relay turn on & off) but not pass testing and shut the TV off
Here the replace board
[url]http://www.ebay.com/itm/Vizio-6871QZH956A-6870QZH104B-Z-SUS-Board-P42HDTV10A-/290707874605?pt=LH_DefaultDomain_0&hash=item43af8a232d[/url]...Last edited by hoadle; 05-12-2012, 06:42 AM.
Leave a comment:
-
Re: my sanyo plasma tv model 50747
Look like you Main Board ZSUS or Main Board YSUS is bad
Leave a comment:
-
Re: sony bravia lcd klv-37s400a restart
"when it starts, it stays on moin one minute and turns off. he does it restart only" look like the digital mainboard is bad (its control on/off and TV function)
open the TV & take picture and pot this thread
Leave a comment:
-
Sanyo DP46848
Hi,
I have a Sanyo DP46848 here that shows a really messed up picture.
When I turn on the screen had vertical line & they moving (look like the "No Signal" message) at first attach
about 15 to 20 min the screen show 1/2 screen look final another is dark see second attach
about 45 to 1 hour the screen is normal see attach third
is there a common T-con failure that does this or is it simply the main input board failure?...
-
Re: LTV32 w1 westinghouse tv
I had friend can make LED at front working by use 5 VDC from power supply Green wire if you look on back is make 5 VDC close to yellow wire ( is just turn on when you push power buttom only) add 100 ohm 1/2 watt resistor weld to left or right leg LED not mid leg...
Leave a comment:
-
Re: LTV32 w1 westinghouse tv
That would be great but I must warn you......the WX tech support guys had me go through the drop-down menu for the settings and there is no on/off setting. If there's another way, I'd be glad to give it a try and, thanks in advance !!!!
Dave
I had same problem Dave get No LED light
Here the Service manual
[url]http://elektrotanya.com/?q=showresult[/url]
Can't find any thing about turn on or off the LED light
If any body know about this let me know
ThanksRe: LTV32 w1 westinghouse tv
Leave a comment:
-
Re: ELO 1529L touch screen x6 with 2 second to black
Most problem with Elo monitor is Cap is bad some time cap look good but when you testing is bad & check inverter side or Cold Cathode Fluorescent Lamp (CCFL). Elo monitor is running 24/7
go to ebay.com & ELO 1529L touch screen you can find out you touch screen price range
Price range from $50 to $200 used on good condition both display & touchscreen, if you fix
or you can pot in Ebay sale for part or repair if you do not want to fix
had 2 way
1/ auction from >$.99 to who know...Last edited by hoadle; 01-31-2012, 06:04 PM.
Leave a comment:
-
Re: Elo 19" LCD Touch Screen Monitor
Is just the another good Elo ET1925L-7UWA-1 19" LCD Touch Screen Monitor I take picture for sample the Elo ET1925L-7UWA-1 19" LCD Touch Screen Monitor I had
The Elo ET1925L-7UWA-1 19" LCD Touch Screen Monitor i had do not turn on at all check the volt at CN101 top to bottom is
1/ adj
2/ on/off
3 & 4/ ground
5 & 6/ 5VDC
7/ 12VDC
When I check the volt at 5 & 6 & 7 the volt go up down from .5vdc to 1.5vdc look like some thing short to ground ...Last edited by hoadle; 01-25-2012, 10:42 PM.
Leave a comment:
-
Elo 19" LCD Touch Screen Monitor
I my firend just give me Elo ET1925L-7UWA-1 19" LCD Touch Screen Monitor is not turn on find out the Inverter Power board PL1942C05-V1 ELO is not get 5 VDC & 12VDC replace all the Capacitors but still same problem, check diode is ok
If some one work on Inverter Power board PL1942C05-V1 ELO please let me know
Thanks...
-
Re: Dynex DX32L152A11 with vertical line
I think maybe bad connect at LCD panel call Tab Bonds
check pot # 29 name only Tono & follow see is can help you
[url]http://www.avsforum.com/avs-vb/showthread.php?t=1173106[/url]Re: Dynex DX32L152A11 with vertical ...=1173106[/url]Last edited by hoadle; 10-19-2011, 07:36 AM.
Leave a comment:
-
Re: Insignia NS-L37Q-10A Backlight
I looking buy the parts # K4086 (maybe 2SK4086LS) at power & inverter 715G3234-1 on the board or Insignia ADTV8NE1AC9
Thanks
Leave a comment:
-
-
Samsung LN-S3241d color snow on screen
My friend give me Samsung LN-S3241dx had problem color snow on screen
I had same problem
[url]http://www.youtube.com/watch?v=GZ3PsqyKR3k[/url]
Here is another Video showing the video problem I'm having.Trying to find out is this a video board or the T-Con board problem. Hope someone can help
Thankshttps://My friend give me Samsung LN...ng to find out
-
Re: Acer Ferrari F-20 monitor
I see you attach, you use 5 wire quick disconnect connect on inverte side, is missing one {VCC = input + volt to inverter (yellow wire)}
you need 6 wire quick disconnect connect
universal inverter board need 2 (input + volt to inverter) & 2 Ground (input - volt to inverter)
Here the wire connect to universal inverter board side
1/ VCC = input + volt to inverter (green wire)
2/ VCC = input + volt to inverter (yellow wire)
3/ On/Off (Black wire)
4/ Adjust or dim (Brown...Last edited by hoadle; 10-10-2011, 06:28 AM.
Leave a comment:
-
Insignia NS-L37Q-10A Backlight
I just had Insignia NS-L37Q-10A get backlight problem
When turned on the TV displays "please wait..." then the screen goes black but remains powered on.
Sound like Insignia ADTV8NE1AC9 Power Supply Unit any one know website to download the Insignia NS-L37Q-10A service manual? or Insignia ADTV8NE1AC9 Power Supply Unit diagram
Thanks...
-
Re: Dynex DX-LCD32-09 had Negative Picture
Find the fproblem on my Dynex DX-LCD32-09 TV shows negative (Inverse) picture
is LCD panel is bad I just bought another Dynex DX-LCD32-09 TV not turn on at craigslist swap 2 screen the negative (Inverse) picture is gone TV look like nomal...Last edited by hoadle; 10-02-2011, 11:16 AM.
Leave a comment:
-
No activity results to display
Show More
Leave a comment: