20" LCD TV Showing about 3/4 SCREEN

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • topj
    Member
    • Sep 2009
    • 11

    #1

    20" LCD TV Showing about 3/4 SCREEN

    Everytime i turn on MY LCD TV it looks like this...Pic1... and then i gotta wait for it to warm up about 20 mins or so it starts to get all fuzzy and stuff Like this,Then full picture. My tv is on a wall mount so im not sure if it has anything to do with pressure or gravity or something because when i press on the sides of the tv against the wall mount it starts to turn into a full picture or when i tilt it up i get a full picture-->exaple.What is wrong with this thing. could it be caps? or is my tv on its way out to the grave.Thanks for your help and ideas in advance.
  • PlainBill
    Badcaps Legend
    • Feb 2009
    • 7034
    • USA

    #2
    Re: 20" LCD TV Showing about 3/4 SCREEN

    After several bad experiences, many people here will not view pictures hosted on an external site. If you want anyone to see them, use 'Manage Attachments' (below the text entry area) to attach them.

    By the symptoms you describe, the flex circuit connecting the tcon to the LCD glass panel is becoming unbonded at the panel end. It's toast. Time to treat yourself to a 55" 3D set.

    PlainBill
    For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

    Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

    Comment

    • topj
      Member
      • Sep 2009
      • 11

      #3
      Re: 20" LCD TV Showing about 3/4 SCREEN

      couple months later lol thx, Sounds like a good idea 3D here i comeee!

      Comment

      Related Topics

      Collapse

      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • Sam Scarbo
        Brother DCP-L2540DW scanner/printer - only showing blinking screen in LCD.
        by Sam Scarbo
        I got this broken printer from my brother who got it from the street. He asked me to help to fix it.

        I need help on fixing this machine.

        Issues/Observations:

        1) When connected to power, it's not working. Only showing blinking screen on the LCD. See pics 1 and 2. It is blinking every 2 seconds.

        2) I pressed the buttons on the control panel to see if there is any response. The "Options" button can turn off the LCD screen, and then press hold the power button for about 1 second can turn the blinking screen back on again. Other than...
        10-19-2023, 10:32 PM
      • Chrissygizmo
        Samsung UE55JU6800K half screen dark
        by Chrissygizmo
        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
        02-10-2025, 12:33 AM
      • spice_disc
        Vizio TV M50-C1 reboot cycle and static on screen
        by spice_disc
        I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

        The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
        09-08-2024, 02:37 PM
      • Loading...
      • No more items.
      Working...