hello guys
I am looking for this dump if somebody has I will be very grateful to share it .
best regards !
ALex
I am looking for this dump if somebody has I will be very grateful to share it .
best regards !
ALex
-
-
Re: Sony Bravia KD55/49xe8096 EMMS dump
it is available here but I can't sign up .....
https://****************/dump/lcd_pd...335-1-0-124128
-
Peace be upon you.
Brothers, I need a dump for a Sony LCD smart TV.
Screen type and model: SONY KDL-55W805B.
Please provide a dump for the device.
The device boots up but the SONY logo doesn't appear at first and remains in this state.
-
Hola a todos, necesito el esquema electronico de la placa 1-983-356-11 de un televisor sony bravia KD-65AF9.
Hello everyone, I need the electronic diagram for the 1-983-356-11 board of a Sony Bravia KD-65AF9 television. -
Hello guys, can someone help me with an eMMC dump for a Sony KDL55W-955B TV, I tried to read the original memory with the RT809H but it shows me that it only has 1888MB even though it should have around 3.8GB. On a new memory it shows me 3776MB. From what I found on the Sony page, the following models could also be compatible:
KDL-65W955B, KDL-55W955B, KDL-60W855B, KDL-50W805B, KDL-42W705B, KDL-32W705B, KDL-48W605B, KDL-40W605B, KDL-60W605B, KDL-55W805B, KDL-42W805B, KDL-48W585B, KDL-32W706B, KDL-42W706B, KDL-42W815B, KDL-42W817B, KDL-50W815B, KDL-55W815B, KDL-42W828B, KDL-42W829B,... -
hello brothers
I need a Sony KDL-40EX600 dump..
The device turns on when i click power button but no picture or sound only tv is stuck on the green light
this is the same problem but not my model
(139) متوقف على اللمبة الخضراء sony kdl-32S5600 اصلاح - YouTube05-07-2025, 11:17 AM -
I have a Sony Bravia KDL-40V2500 that will not power on. The indicator flashes red 3 times.
I do not hear any sound and I cannot see any backlight.
I have tried disconnecting every cable on each board one at a time to see if anything changes.
The only change is when I disconnect AC-DET cable on the Power Supply board or on the other end if I unplug the CN7009 connection on the B-Board and try to power on the TV the indicator will stay on solid green until I power off.
My friend ordered another used power supply board but it is also doing the red indicator flash 3 times...
Comment