Grundig GV-280S S-Vhs VCR PSU beeping?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hugocarmo
    Member
    • Feb 2021
    • 39
    • Portugal
    #1

    Grundig GV-280S S-Vhs VCR PSU beeping?

    Hi again everyone.
    Today I have a problem with this machine, a S-Vhs from Grundig model GV-280S.
    The problem is that it doesn´t turn on, the power supply beeps for some reason, but the power supply doesn´t have any buzzer, I think it´s a component that´s making the noise.
    I will attach a link to the video so You can listen by yourself.
    I took it off from the unit to take a closer look but cant see nothing burned or cracked solder.
    Anyone had an issue like this?

    https://vimeo.com/799534459

    Thank You,

    Hugo.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • LEECH666
      Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
      by LEECH666
      Good day ladies and gentleman!

      I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

      This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

      I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
      01-19-2024, 05:46 PM
    • redbaron1007
      Liquid damaged macbook A1466 fan spins, but doesn't turn on.
      by redbaron1007
      I got a tricky one today in the form of a macbook air A1466 820-00165-A that will recognize the charger and turn the light green then back to orange and the fan will spin constantly, but the system won't power on. The screen never turns on, it doesn't make the bong noise it's supposed to, and pressing the power button doesn't do anything. When I took the board out to visibly inspect it I only found one spot of corrosion on the bios IC. I pulled the chip, cleaned it and the area with IPA and put fresh solder on both and put the bios chip back on, but when I went to test it again it still does the...
      10-24-2024, 05:45 PM
    • melvinvdb
      Lenovo y520-15ikbm most of the time doesn't turn on
      by melvinvdb
      Hello,

      I've repaired a few laptops in my life but this time my own laptop died😂.
      Funny enough this one is a bit tough on me.
      It doesn't turn on (most of the time).
      Model: Lenovo y520-15ikbm (NM-391).

      The only way to make it turn on is:
      1) unplug battery + charger + rtc (seems irrelevant)
      2) wait a minute
      3) plug battery/charger in
      4) on charger plugin, laptop turns on by itself. On battery plugin you have to press power button. Sometimes nothing happens and you have to try again.
      5) when it turns on it also displays POST...
      08-15-2024, 12:28 PM
    • h4rdw4re
      Grundig 40VLE7131BF led strips doesn't light up
      by h4rdw4re
      Hi guys,
      I have one very old TV.
      Main problem I have with this tv is that led strips won't light.
      I measured voltage levels, and inverter input is 24V.
      other voltages are also ok.
      What I found is that removing and connecting again connector CN1 led strips lights for shorts time (but only once). When led strips lights up then light is uniformly spread on whole panel.
      First I thought that led strips are dead, but I'm quite sure that problem is not strips related.
      I don't know what voltage level is at output of inverter board (samsung SSL400_3E2A) and how...
      10-09-2022, 11:10 AM
    • Victor Petrovich
      Lenovo IdeaPad 3 15ITL6 doesn't start
      by Victor Petrovich
      I have laptop Lenovo IdeaPad 3 15ITL6 with Intel Core i3-1115G4. When I press the start button, LED light on the start button starts blinking 12 times, then stops and after some time starts blinking 12 times again. When it stops, all voltages are down.

      The motherboard is HS460 HS560 HS760 NM-D471 Rev: 2.0
      S/N: PF3Q0WTF

      The motherboard is not mine, also there were corrosion on the board which I cleaned.

      Methods of fixing like fully turning off the motherboard or starting only with adapter doesn't work. All testing were did only with adapter on.
      ...
      06-07-2025, 02:40 AM
    • Loading...
    • No more items.
    Working...