55" Magnavox LED set flashes picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rmasters3
    Senior Member
    • Mar 2010
    • 126
    #1

    55" Magnavox LED set flashes picture

    When using a cable box with an HDMI connection, I turn the set on and a scene flashes on the display, but then goes to black. When I bring up the sets Menu, this will run for an hour as well as anything else. I have replaced the cable box with no effect. I'm getting ready to try a Blu-Ray player to see how that acts.

    Does anyone have thoughts? Thanks
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12331
      • U.S.
      #2
      Re: 55" Magnavox LED set flashes picture

      so did you try the BR player?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • FZG
          Panasonic AG-1000B VHS player with bad picture quality
          by FZG
          Hello!

          I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

          Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

          I want to know, is this something that could be solved by recapping or is the video head likely gone?

          Also, what mechanism is this?

          Any feedback is appreciated!...
          05-06-2024, 07:16 AM
        • nervous_capybara
          Repairing the Hitachi DA-6000 CD player
          by nervous_capybara
          Hello everyone !

          I recently conducted maintenance on a Hitachi DA-6000 CD player for my grandparents : it had two distinct issues.
          Feel free to share your experience if you ran into other issues.

          DISCLAIMER : BE VERY CAREFULL WHEN OPERATING ON THIS SYSTEM : THE HIGH VOLTAGE IS VERY CLOSE TO THE VARIOUS TESTING POINTS, PROCEED WITH CAUTION

          CD tray would not come out of the player
          I could hear a motor spinning inside the player but the CD tray would not come out.
          Turned out that the issue was the CD tray belt that aged poorly and began to...
          11-05-2025, 03:11 AM
        • ItepK
          LG 32LG3000 TV, three red light flashes, then the backlight turns on, but no picture
          by ItepK
          Hello everyone! I've found this television, and I began troubleshooting it.

          First, the television kept rapidly power cycling. I've warmed up the capacitors with a hairdryer, and after 3 dimmed red blinks, the backlight turned on, then turned dim, and no picture was present on the screen.

          I believed that this was caused by a bad power supply producing insufficent power (I've measured 3.5v on the 5.2v rail), so I've blindly recapped the board.

          After the recapping, all the voltages stableized, however, the issue in the title still remains.

          I could...
          01-03-2025, 09:01 AM
        • Tr0ll
          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
          by Tr0ll
          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

          Original T-con:
          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

          First replacement T-con:

          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
          10-07-2023, 07:48 PM
        • JJAAMM
          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
          by JJAAMM
          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

          Problem
          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
          07-06-2023, 06:01 AM
        • Loading...
        • No more items.
        Working...