Hello all, There is Canon MG7120 printer. I tried to reset the ink absorber counter with Service Tool software, but service mode was locked. Maybe someone has EEPROM file for this printer?
-
-
Re: Canon MG7120. Need EEPROM file.
Hi there..
I Also stuck on my canon Mg7170. There are 2 MG7170 and all of them were stuck.
The last one, today. I tried to save eeprom data of MG7170 with Service tool v3.4, nothing happened and when I restart the printer and go to service mode the result 'orange light'.
Did I wrong procedure when backup the eeprom?
-
hi,
I've here this printer that is "locked" because Ink Absorber waste ink Counter is full so when I power on it give a sequence of 7 blinking orange LED in sequence with green power ON led.
Reading a lot over Internet it seem that is an "use&trash" model so there isn't a way to reset manually this counter and also seems that it is not possible to enter in Service Mode status to reset with Canon Service Tool utility.
This is really suck because I cleaned already the printer and bought both new cartridges!!!
Working around for a while I finally... -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hello.
I need dump file for Canon G4411, someone help me07-30-2024, 10:59 AM -
Hello guys,
Does somebody has this dump for printer canon G3430
Thank you in advance
Comment