Canon L2 and A1 Recapping

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pentium
    Badcaps Legend
    • Mar 2006
    • 2778
    • Canada
    #1

    Canon L2 and A1 Recapping

    I have two early 90's prosumer Hi8 camcorders that I want to use but both need to be recapped. I have not been able to locate service manuals for either and I don't have a capacitor BoM to work from.
    Has anyone else had the honor of disassembling these units and have knowledge how the hell they come apart?
    Find Nedry!


    Check the Vending machines!!

    <----Computer says I need more beer.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Catisfaction
      Canon TS8350a waste inc container reset
      by Catisfaction
      Hi all,
      since my second device of this model number now died due to Canon being service unfriendly, I'd like to reset the counter myself.
      This model of printer seems to be on non of the eBay sellers and other suppliers support lists for the Canon Service Tool. Other forums suggested the v5103 version of the tool, which did not work unfortunately.
      Has anyone maybe experience with this exact model?
      Thank you!
      07-02-2025, 07:46 AM
    • joaquinmjuan
      Canon TS8350 Screen Freezes on Power On
      by joaquinmjuan
      Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...
      05-07-2025, 12:26 AM
    • bamdad61
      Canon DR-1210C flash dump request
      by bamdad61
      Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.
      04-15-2025, 02:43 PM
    • proxneo
      Recapping Sony ICF-SW55 - verifying cap values
      by proxneo
      Dear reader

      I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

      At the moment, I have selected replacements based on the following list of values:

      3 x 470uF 10VDC
      3 x 4.7uF 35VDC
      4 x 47uF 50VDC
      8 x 22uF 6.3 VDC
      1 x 220uF 6.3VDC
      5 x 100uF 6.3VDC

      Which...
      06-21-2023, 12:38 AM
    • shybear
      Canon Pixma MG2550S dump BIOS
      by shybear
      hi,
      I've here this printer that is "locked" because Ink Absorber waste ink Counter is full so when I power on it give a sequence of 7 blinking orange LED in sequence with green power ON led.
      Reading a lot over Internet it seem that is an "use&trash" model so there isn't a way to reset manually this counter and also seems that it is not possible to enter in Service Mode status to reset with Canon Service Tool utility.
      This is really suck because I cleaned already the printer and bought both new cartridges!!!
      Working around for a while I finally...
      01-20-2021, 05:28 AM
    • Loading...
    • No more items.
    Working...