hi i need mg5750 dump files both 25q16 and 25q128 motherboard qm7-4424
thanks for help
thanks for help
-
-
Re: mg5750 dump needed
no one -
Re: mg5750 dump needed
try to remove dump from another motherboardComment
-
-
Re: mg5750 dump needed
Hello,please is it possible to use the canon mg5750 dump on canon mg5751???Comment
-
Re: mg5750 dump needed
thankyouComment
-
Re: mg5750 dump needed
merci thanksComment
-
Re: mg5750 dump needed
ok thank you....
ca marche meeciComment
-
canonmg5750 dump
canonmg5750 dumpComment
-
Re: canonmg5750 dump
شكرا يا عبدالقادر ****thanks abdelkaderComment
-
Re: mg5750 dump needed
thanksssssssssComment
-
Re: mg5750 dump needed
mg5750 dump files both 25q16 and 25q128Comment
-
Re: mg5750 dump needed
thanksComment
-
Re: mg5750 dump needed
thank you....Comment
-
Thank you so muchComment
-
Hello,
I am trying to repair a Dahua NVR4216-4KS2 that is not booting.
The main BIOS/firmware is stored in an SPI flash EEPROM (Winbond 25Q128, labeled as U130 on the PCB).
I have a CH341A programmer and I already attempted the following steps:- Identified the correct chip (W25Q128, 3.3V SPI flash).
- Tried to read the contents with CH341A Programmer software. The dump seems corrupted and I often get the error: “Chip with the contents are in disagreement.”
- Compared several chip type selections (24Cxx and 25Qxx families) to confirm it is indeed a 25 series SPI
08-19-2025, 09:23 AM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hi.
Motherboard model R0171-2281-0122.
I need dump for SPI W25X41CLSNIG.
My monitor is not powering on.
Thanks.08-04-2022, 07:04 AM -
Hi everyone,
I accidentally bricked my NUC7i5BNH after disabling the option to boot from USB, and now it's not showing any display at all. I tried the USB recovery method, but unfortunately, it didn't work.
Local repair shops are quoting around $150 just to flash the EEPROM, but considering the unit is only worth about $75 these days, that’s not really an option. So I'm hoping to learn how to flash the chip myself. But to get started, I need a working BIOS dump for the NUC7i5BNH.
I did come across a post with a dump for the NUC7i7BNH, but I wasn't sure... -
Hi guys!
Hope I am posting in the right section.
I am trying to reprogram a corrupted X870 eagle wifi 7 mobo, can somebody help me with a dump file for that?
I am planning to use CH341A programmer.
Any tips and tricks? Thanks a lot!
post merged.. next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..
Comment