QY6-8002 Canon 2410 2010 inkjet (head pinout) HELPPPP eeprom

Arashiak

New Member

Join Date: May 2025

Posts: 6

Country: Usa
#1

QY6-8002 Canon 2410 2010 inkjet (head pinout) HELPPPP eeprom

05-26-2025, 06:09 PM

Dear all friends
I am going to read the eeprom inside this printer head i need some help from some expert that work with the canon printers

1. what chip they use inside the head that i mention in title?
2. Is there anyone helping me identifying the pinout

Thanks in advance to all the people that cooperate and Badcaps.net staff.

2 Photos
Tags: None

Previous template Next

Canon TS8350a waste inc container reset

by Catisfaction

Hi all,
since my second device of this model number now died due to Canon being service unfriendly, I'd like to reset the counter myself.
This model of printer seems to be on non of the eBay sellers and other suppliers support lists for the Canon Service Tool. Other forums suggested the v5103 version of the tool, which did not work unfortunately.
Has anyone maybe experience with this exact model?
Thank you!
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
07-02-2025, 07:46 AM
Canon TS8350 Screen Freezes on Power On

by joaquinmjuan

Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
05-07-2025, 12:26 AM
Canon DR-1210C flash dump request

by bamdad61

Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
04-15-2025, 02:43 PM
Canon Pixma MG2550S dump BIOS

by shybear

hi,
I've here this printer that is "locked" because Ink Absorber waste ink Counter is full so when I power on it give a sequence of 7 blinking orange LED in sequence with green power ON led.
Reading a lot over Internet it seem that is an "use&trash" model so there isn't a way to reset manually this counter and also seems that it is not possible to enter in Service Mode status to reset with Canon Service Tool utility.
This is really suck because I cleaned already the printer and bought both new cartridges!!!
Working around for a while I finally...
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
01-20-2021, 05:28 AM
Canon printhead eeprom chip identification, and find pinout

by stavi

Hi There,

I'd like to read/write the contents of the eeprom chip.

This is located on the print head of a Canon inkjet printer.
It is likely that this disables the head after printing an xy copy.
Unfortunately, I can't identify the chip, so I can't read it either.

That is written on it: TO2 (T null? 2), KU
Does anyone have any idea what this could be?

Many thanks for help...
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
08-29-2022, 01:46 PM
Loading...
No more items.

QY6-8002 Canon 2410 2010 inkjet (head pinout) HELPPPP eeprom

QY6-8002 Canon 2410 2010 inkjet (head pinout) HELPPPP eeprom

Related Topics