Hi,
I need a xerox phaser 3330 moded firmware that make the printer work without drum & carriage chips
I need a xerox phaser 3330 moded firmware that make the printer work without drum & carriage chips
-
This specification for the FUJITSU ESPRIMO P410 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ESPRIMO P410 boardview and ESPRIMO P410 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for FUJITSU...09-12-2024, 03:44 PM
-
Hello friends,
I have a problem with this printer Xerox Versalink C505 , printing perfectly in B&W but bad in color.
There is a little yellow ghost printing around color print.
So little text in color is unreadable.
I already change drum cyan & yellow with no success.
I try (i think) all avalable calibration in printer menu..
(black drum is dead but it's not the problem i think)
I'm not a printer specialist,if anyone has an idea?
Thanks !...12-01-2024, 09:08 AM -
Apple MacBook Pro 15" 820-3330-B 051-9585 Schematic & Board View...10-01-2024, 07:20 AM
-
Good Day,
Kindly review and check what the problem with the laptop
- Laptop Latitude 3330
- ST : CMTRMG3
1st issue, only power button on and black screen, and after I did the ME cleaning, laptop still blank / black screen and keyboard on and restart 3x times but once press D+power button, display test appear and back to blank/black screen.
Thank you very much
Salam,
Three
... -
Hi guys, how are you all?
I have a MacBook 820-3330 with no power and need a little help please.
I have the original charger that supplies 16v but doesn't light up at all. I also have a USB C charger and converter that does light up and provides 19v.
Both give me a 12v on board and i have 3.3v.
I have 5 volt but its at 4.7v.
I have 1 voltage that isnt present but dont know if this comes after power on, this is q7220 pins 6,7,8 0v, doesnt seem to have any switching voltages going in from u7201.
I will give you some readings that I have and we can go from there....