Apple 85W MagSafe Power Adapter - blown - help with component identification

[lotas]

Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

Here I found a diagram on the A1424, maybe it will help in something.

[duwane]

Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

Here I found a diagram on the A1424, maybe it will help in something.

Awesome thanks. I will check through this and see how much of it is accurate for the A1343.

[duwane]

Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

Here I found a diagram on the A1424, maybe it will help in something.

Just did a brief check through it, and found the following section (see image) which pretty closely matches the section of the circuit that I am trying to find the value for the burned resistor.

I think a value of 0.18ohm for R051 in my case (R26 for the A1424) is what I am going to go with, as my gut feel was 0.17ohm based on what I could still idntify from the resistors burned marking. Thanks again foir posting this!