Has 2 blown Resistors and probably DAP015D. Can't identify markings.
-
Hi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...04-21-2025, 11:41 PM -
Hi all,
i got a Flir scout where a connector was ripped off and i will have to make new pads. One big problem i have right now is that 2 small smd components are missing near the pads and i was only able to find a comparable pic of this part of the board.
So right now i need to know what i need exactly for a replacement and the values. I contacted Flir by mail but they don't give out schematics and told me that i can use the guarantee if i have it (funny guys).
Anybody has an idea what i can do?09-09-2024, 03:11 AM -
Hello.
I would like to repair an apple keyboard A1243, magic keyboard with nums pad, USB. I really like to repair things and I don't need this one immediately.
Before I dismantle the ultra thin and fragile sheets of plastic that made the keyboard I am looking for the schematics to manage the prospection of the device failure which, in my opinion, come from a little rust on some tracks.
I alreaday have a little electronic experience.
So here it is, I am looking fo the schematics, I already found almost every computer pdf schematics on earth but not for this keyboard....03-07-2022, 04:00 AM -
Hi i need somebody to help me identify this chip the markings is AKLG 302. It's on Hp Pavilion 14-am 245 G5 6050A2823301-MB-A02 motherboard
... -
no green/orange light on charger and it has 12.67V on PPBUS_G3H & 3.38V on PP3V42_G3H but not power on...