legrand daker 6kVA error code 30

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mokfad
    New Member
    • Dec 2018
    • 2
    • singapore
    #1

    legrand daker 6kVA error code 30

    Hi,

    Does anyone here can help to explain what is error code 30 indicated on the Legrand Daker 6kVA UPS display panel ?

    I have checked the manual but there is no mentioned on this error code.

    Appreciate all the help on this.

    Thank you
    Tags: None
    • SoporteHR
      Senior Member
      • Sep 2018
      • 80
      • Venezuela
      #2
      Re: legrand daker 6kVA error code 30

      Hello, Mokfad.

      But what's wrong with you? Did you stop doing something special?

      I just downloaded the manual, I see that you can connect via USB or RS232. Try downloading the computer software. There you are likely to be able to see the equipment's error records in more detail.

      On the manufacturer's page you have these available:
      "UPS SETTING TOOLS" and
      "UPS COMMUNICATOR"
      "UPS MANAGEMENT SOFTWARE"

      You're right, that error 30 does not appear in the user's manual.

      Can you upload a photo of the control panel with the error?

      regards

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Curtissimo
          HP EliteBook 850 G8 - Error code / Caps Lock permanently on and blinks twice every 6 seconds
          by Curtissimo
          Hi everyone.

          I have a HP Elitebook 850 G8.
          Serial: 5CG2324XM0
          ProdID 6L8D5EC#ABA
          It has a Winbond W25Q256JVEN Chip.

          I need to remove BIOS Password.

          I made a dump with an CHA341A programmer and NeoProgrammer 2.2.0.10.

          Attached my dump.

          I also used the HP Unlocker tool to create an unlocked file (I followed the guidelines)

          I also downloaded latest HP BIOS Update (SP158137) which includes 3 .bin files. I found the Number T76 in my original dump, so I used: T76_01210000.bin

          What I did:...
          08-26-2025, 04:42 AM
        • Maalobs
          Philips 60PFL8708S/12 - QFU1.2E LA - Error code 53
          by Maalobs
          Hi,

          I have a 2014 vintage Philips 60PFL8708S/12 that suddenly died in the middle of the kids watching a show.

          The relevant service manual for the chassis is available here.
          The TV no longer powers on, and leaving it powered on for a few minutes results in the layer-1 error with 2 blinks.
          When I short the SDM to ground I get the layer-2 error code 53.

          The inside of the TV has no damaged components and no swollen capacitors.
          In SDM-mode when all the power rails are left on despite entering the protection mode, I tracked down and measured...
          04-02-2019, 01:15 PM
        • bohaboha
          error code 0x80072f8f 20000 When widows upgrade to 10
          by bohaboha
          when upgrading windows 7 to windows 10 i get this error code (title).then to correct the error i have to enable tls 1.1 and tls 1.2 in registry editor. but there I do not find TLS 1.1 and TLS 1.2 instead there is SSL2.0
          in REGISTER EDITOR on windows 7 ad can one do to correct the problem?

          Error Code 0x80072f8f 20000
          08-30-2023, 07:06 PM
        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • CdDvdFlash
          Hitachi HTA-DD3W AV Receiver Error Code -Protect-
          by CdDvdFlash
          I have a Hitachi HTA-DD3W AV receiver and when I got it I tested it working fine with speakers but it needed a clean inside because it had signs of moisture in it but it was fully dry with bits of wood chips, I guess this was left in a shed so I fully disassembled it and cleaned it with isopropyl alcohol very carefully, some de-soldering was also needed but now its very clean, luckily there was no rust on any components and all the capacitors are fine with no bulging. When I turn it on I hear a relay switch on then a few seconds later another relay switches on or off and the display has a "-PROTECT-"...
          07-10-2023, 06:05 AM
        • Loading...
        • No more items.
        Working...