Goldmine Electronics has Avery good sale on fans

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6069
    • USA
    #1

    Goldmine Electronics has Avery good sale on fans

    I post this in case any one is interested in this deal if you can use them

    This offer expires on 11-27-16

    http://www.goldmine-elec-products.com

    30 Fans Valued at $1050.00 - Just $10 Bucks!!!
    Papst 24VDC 80mm Multifan 8314/19H
    Powerful high quality Papst 80mm fan model multifan 8314/19H. Operates on 24VDC at 245mA (20-26.5 VDC range) Has 12" flexible color coded power leads: Red (+), Black (-), Yellow - Alarm.

    Specs: Airflow 47.1 CFM, ball bearings, noise 48dB, speed 5000 RPM, Power - 6Watt, Frame 80mm X 80mm X 32mm, housing - Polybutylene Terephthalate (PBT). Rated for 55,000 hours.

    This is a very high quality precision made fan by Papst. Brand new - Retails for $35 per fan - Box Valued at $1050.00! Check out our blowout price.

    Note when purchased in Quantities of 30, you will receive a factory labeled box that contains the 30 fans.

    G21651A $105.00 Only $10.00!!! - (Valued at $1050.00)

    Does anyone know how to change a fan speed controller from 12 volts to 24 volts
    I bought one of these deals to keep some equipment controller cool but I don't want them to run a full speed all the time
    Last edited by sam_sam_sam; 11-23-2016, 05:07 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • emil_t
      RTX3090 working fine but fans not spinning
      by emil_t
      Hello guys. I have a problem with a PNY XLR8 GAMING RTX3090 graphics card. The problem is that it displays and works fine, but the fans don't spin at all. The problem occurred when someone else removed the fans in order to clean it and broke one of the fan connectors. He replaced it himself and after that, it wasn't working anymore. I guess he damaged something else in the process. What i have done so far: I found 2 capacitors next to the connector that were in a bad shape, he must have touched them with his tools - they weren't shorted, but i replaced them with similar ones from a similar card....
      04-12-2024, 06:54 AM
    • b-slayer
      Asus Strix-G15-G513RM fans don't work
      by b-slayer
      Hi everyone,

      I have an Asus Strix-G15-G513RM, who starts normally, but as the fans don't work, it stops and is really really hot,
      The Bios was the latest one, (327), but I managed to downgrade it to version 325 to see if it changed something,
      (as I read somewhere that a corrupted bios can explane my problem), but nothing, it just went full blow during the downgrade,
      (so now, i can say that the fans are fonctionnal), but as it restarted, the fans won't turn at all again.

      ah, and in the Bios, even when the temperature is really hot, the fan are a 0 rpm,...
      09-04-2025, 04:58 AM
    • JayPoorJay
      Hot Water Rad - A Few ECU Fans and a Timer Switch
      by JayPoorJay
      Good Afternoon, Good People.

      I know this will be an elementary little project for most if not all of you, but I thought I would write a post and get put on track, rather than bumbling my way through it with all kinds of trials and errors.

      I REALLY would appreciate y'alls help.

      This is the problem - My wife and I purchased a big ol Victorian/Colonial House in NYC two years ago. The kitchen is surrounded on 3 sides by exterior walls, there is also a 1/4 of the kitchen floor (ceramic tiles) that has a crawl space underneath, and the kitchen gets FREEZING cold...
      10-29-2024, 12:54 PM
    • sam_sam_sam
      Electronic Goldmine has replacement Irons for the ZD-978 or similar model number this the one that has the sleep function
      by sam_sam_sam
      This is a new item at Electronic GoldMine that has arrived within the last few weeks

      Here is the link for them I know for sure that it works because ( I tried it on mine soldering station ) I bought two of them and I just bought two more of them so I have some extra replacement ones in my parts bin

      Stahl Tools DDDS Replacement Iron for DSDS Stahl Solder Station
      https://theelectronicgoldmine.com/products/g28392

      One note it will not work for the ZD-917 or similar model number that does not have the sleep function that are the same iron but the plug only...
      11-24-2024, 01:25 AM
    • sda sad
      my Xiaomi Notebook Pro X laptop fans work like crazy for no reason
      by sda sad
      Hope this is the right place, someone can help me.
      My laptop started having a really strange problem....
      When I turn it on the fans start working at a crazy rate and with random breaks...
      They can work for say 10 seconds and stop for 2 seconds and then turn on again for 5 etc...
      And it's from 0 to 100%. I tried to install AIDA and did the processor chip test and the graphics did not exceed 70 degrees and the fans were not even close to working at the power they work randomly.

      The model of the computer:
      Xiaomi Notebook Pro X 15 OLED (A30)

      ...
      04-23-2024, 09:55 AM
    • Loading...
    • No more items.
    Working...