Duracell 2016 4 port USB charger 5v @ 4 amps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6040
    • USA

    #1

    Duracell 2016 4 port USB charger 5v @ 4 amps

    What do you think about this power supply
    I just recaped this power supply it had no name brand caps in it
    If I do not recognize brand name I replace them
    Attached Files
    Last edited by sam_sam_sam; 11-06-2016, 12:01 PM.
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31066
    • Albion

    #2
    Re: Duracell 2016 4 port USB charger 5v @ 4 amps

    looks pretty good to me.

    Comment

    • kaboom
      "Oh, Grouchy!"
      • Jan 2011
      • 2507
      • USA

      #3
      Re: Duracell 2016 4 port USB charger 5v @ 4 amps

      Originally posted by sam_sam_sam
      What do you think about this power supply
      I just recaped this power supply it had no name brand caps in it
      If I do not recognize brand name I replace them
      Same here.


      Had a 16 bay AA/AAA Titanium Innovations MD 1600-L from batteryjunction. Before using it, I opened and recapped it. Noname craps- two were leakers and another had either a loose lead or corrosion. I think I used Panasonic FRs or FMs in that.

      Recapped the SMPS wallwart too- that's a CWT and was full of cheapo-teapos and a crapxon. Used CS for the bulk filter, FRs for the secondary caps, and PWs for all others.

      This is my unit and it's been fine for 3-4 years.
      "pokemon go... to hell!"

      EOL it...
      Originally posted by shango066
      All style and no substance.
      Originally posted by smashstuff30
      guilty,guilty,guilty,guilty!
      guilty of being cheap-made!

      Comment

      Related Topics

      Collapse

      • danandrei96
        Thinkpad E15 NM-C421 charger not detected after port replacement
        by danandrei96
        Hi all!
        Usually I like to think my diagnostic skills are quite good but this one has me a bit stumped.

        Laptop came in with a damaged very loose USB-C port.
        I ordered the correct port and replaced it, all good so far. Now when I plug in the usb-c charger there's a solid connection, I can see that the charger voltage jumps up to 20V, and if I press the power button the laptop turns on.

        Unfortunately, the charger LED stays off at all times and in Windows the laptop doesn't detect that it's plugged in, despite running off the charger even with the battery...
        06-01-2023, 11:20 AM
      • motormayhem
        Lenovo T460 Only Charges on One Charger
        by motormayhem
        Laptop Question
        Hello,
        I'm working on a Lenovo T460 that has been having trouble charging as of late. Its worked well since I've owned it for a few years. When I went to use it the other day it was dead and wouldn't turn on (was sitting on an Anker 65W GaN charger). After some fiddling with the charger I got it to turn on and start charging, but seemed like the charger was not working as it should (took a few plug and unplug cycles to get it to start charging).

        A day later it was dead again and wouldn't boot/charge no matter what I did. No lights or anything when...
        05-12-2023, 01:46 PM
      • RWS93
        Apple A1990 / Board number: 820-01041
        by RWS93
        Brand: Apple
        Model: A1990
        Board number: 820-01041


        Problem: I am not an Apple kind of guy to start with. But I am quite experienced with motherboard repairs in general. So the laptop is stuck with 5v 0.250A and does not negotiate 20v. Same symptom on all 4 USB C ports. When charger is plugged the amps start at around 0.060 then go trough: 0.100 - 0.180 - 0.230 - 0.244 and stay like this. Laptop responds to the power button: once I hold it long enough current goes down to 0.060A and then up to previous levels.

        Board clean, no liquid damage, no corrosion....
        04-11-2024, 03:43 PM
      • Document Archive
        ISL88739AHRZ ISL88739 Laptop Battery Charger Datasheet
        by Document Archive
        The ISL88739 & ISL88739AHRZ are a highly versatile combo battery charger
        configurable for operating as either a Hybrid Power Boost (HPB)
        charger or a Narrow VDC (NVDC) charger, supporting 2-, 3-, or
        4-cell batteries. Both configurations allow the battery to work with
        the adapter together to supply the system load when it exceeds
        the adapter capability, referred to as system Turbo mode. HPB
        charger configuration reverse-boosts battery energy to the system
        bus to help the adapter provide the system power in Turbo mode.
        NVDC charger configuration...
        11-05-2024, 03:28 PM
      • flat-earther
        how to prevent a connected charger from draining battery when not charging?
        by flat-earther
        I have an RC radio handset(Taranis QX7) which doesn't have internal battery charger which means I had to remove the battery every time I needed to charge it.
        So to improve it, I added a 15W USB-C charger board(link) inside and soldered it to the same connector on the PCB where the battery plugs into, great, now I can simply charge it with a USB-C cable.

        but the problem I found is that after the radio sat for two weeks without being used the 2S 18650 battery that I'm using was at 4.2V!
        So the battery is backfeeding the charger and being drained.

        How can I prevent...
        08-07-2025, 01:04 PM
      • Loading...
      • No more items.
      Working...