Got a sony BDP-S570 3d bluray player that's completely dead, no power.
Thought I would check the diodes first are only 3 is the power supply.
31DQ10 SCHOTTKY Diode - Reading 0.227v (only reading one way)
Is that too low, normally look for around 0.4-0.6v but not sure if its different on schottky diodes or the same applies?
Thought I would check the diodes first are only 3 is the power supply.
31DQ10 SCHOTTKY Diode - Reading 0.227v (only reading one way)
Is that too low, normally look for around 0.4-0.6v but not sure if its different on schottky diodes or the same applies?
Comment