ACBel API1PC36 Capacitors Soldering Points

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kaydee
    New Member
    • Apr 2024
    • 4
    • Germany
    #1

    ACBel API1PC36 Capacitors Soldering Points

    Hi there!

    I took my time to identify the soldering points for the capacitors. This should be used as a reference with no guarantee!

    Best,
    kaydee
    1 Photo
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • dragon3x
      After updating motherboard capacitors, what to do next (Asrock K7VT2, SOLTEK SL-75FRN2L)
      by dragon3x
      Hi, I have some 32 bits computer motherboards that need repair, as they fail to
      power on.

      Here are some examples :

      (N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
      switching supply area).
      (N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
      than 6.3 V.)

      1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
      I replaced capacitors with aluminum-polymer.
      3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA...
      03-21-2025, 02:46 PM
    • kaydee
      ACBel API1PC36 Support needed
      by kaydee
      I recapped the power supply recapping the Power supply with Toasty's sketch (replaced all Shotgun, as well as "Other" caps besides C4+C5+C37). Somehow the PSU turns automatically on when I insert it in the socket. Did anyone else encounter this problem?

      I would be really thankful for some advice.

      Best,
      Koray
      04-29-2024, 10:34 AM
    • slybunda
      AA and AAA battery charger capacitors?
      by slybunda
      hey all, iv got my favourite battery charger here which iv had for many years probably 15 years now or maybe even more. it still works good but thought id open it up to clean the dust out of it, lots of dust inside but now its clean and noticed 4 capacitors inside it and wondered if i should replace them.
      it has inside:
      2 x 47uf 16v caps 105c branded as Su'scon (lol sounds sus to me)
      2 x 470uf 16v LZ105c branded as G.Luxon

      not heard of these brands are they any good?

      iv attached photos of the charger and the board inside for an idea on the type of...
      12-24-2023, 04:41 AM
    • sam_sam_sam
      Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
      by sam_sam_sam
      I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

      This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

      After all of...
      07-13-2024, 08:14 PM
    • Azurain
      Elitebook 840 G5 Bios Chip Soldering Question
      by Azurain
      Hi everyone,

      I have an HP Elitebook 840 G5 that I am trying to get working again. I've removed the front bios chip (the 32mb one) and have run it through HP unlocker already. I've uploaded and verified the new bin, but am now experiencing an issue that has led me to believe I've been soldering the chip back to the motherboard incorrectly.

      Essentially, after re-soldering the chip back into its place and reassembling the laptop, the charging light immediately flashes orange and white and then shifts to a solid white. The capslock and numlock lights blink seven times...
      04-14-2023, 06:58 PM
    • Loading...
    • No more items.
    Working...