Help identifying this part in AP-396AM Sony tv psu - Badcaps

New Members (required) Introduce yourself here. Read the Forum rules here.

X

jord4231

Member

Join Date: Feb 2022

Posts: 16

Country: Australia
#1

Help identifying this part in AP-396AM Sony tv psu

04-20-2024, 04:20 AM

Looking for a replacement for this. It's in the 3.3v standby section.

I think it reads GA6
I could be an A6 switching diode but I'm not sure because pin 2 is connected.
Any help would be much appreciated
IC951

Thank you!

2 Photos
Tags: None
jord4231

Member

Join Date: Feb 2022

Posts: 16

Country: Australia
#2

04-21-2024, 01:17 AM

I'm now thinking it may be a APL431L Shunt regulator as it connects to the optocoupler that gives the primary side driver ic feedback
Comment
lotas

Badcaps Legend

Join Date: Jan 2016

Posts: 4465

Country: Russia
#3

04-21-2024, 04:53 PM

GA6 - AZ431LANTR-G1
Attached Files
Comment
jord4231

Member

Join Date: Feb 2022

Posts: 16

Country: Australia
#4

04-21-2024, 08:28 PM

Originally posted by lotas

GA6 - AZ431LANTR-G1

Thank you. I've been searching for GA6 and was not able to find this. really appreciate the response
Thank you
Comment

Previous template Next

usb-c hp elite x2 help me identifying this part

by VoicE2000

Hello all, Can anybody help me identifying this part its on the usb c line on a hp elite x2 ,Seem like a filter or cap ,or some sort of short or polarity protection.anyway its blown.
...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-15-2024, 10:51 AM
Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...

by edugimeno

Hi There!
I'm trying to help my friend who owns a restaurant be just bought.
He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
It's stuck using, I guess, the 2 sided tape that comes with the strip
The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
- Channel: General Electronics Technical Discussion
09-05-2024, 09:34 AM
iPad Pro A1876 SHORT Part Identify Help Needed

by G-Sting

So My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?

i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something

SO My main concern is what part should i order what should i search the name for ?
on Ipad...

4 Photos
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-15-2025, 09:30 AM
Help identifying part#

by tknox11

Does anyone familiar with what this full part# is? Its off the mainboard from a Miller Spectrum 375 plasma cutter, component location Q6. Thanks for any help guys!

1 Photo
- Channel: General Electronics Technical Discussion
02-21-2025, 06:00 PM
Sony SLV-E780 Power Supply Issue – Clicking Sound, Need Help Identifying Faulty Component

by Akuanka

Hi everyone,

I'm troubleshooting a power supply issue with a Sony SLV-E780 VCR. The device clicks repeatedly but doesn't power up completely. I've already replaced five capacitors, but the problem persists.

Here's a video link https://photos.app.goo.gl/3Xki6yvCLn67gLX78 showcasing the sound. Based on your experience, could this be due to a transformer, diode, or another component? Any guidance on what to test or replace next would be greatly appreciated.

Thanks in advance for your help!
- Channel: Troubleshooting Power Supplies and Power Supply Design
11-23-2024, 01:12 PM
Loading...
No more items.

Working...