Does anyone familiar with what this full part# is? Its off the mainboard from a Miller Spectrum 375 plasma cutter, component location Q6. Thanks for any help guys!
Help identifying part#
Collapse
X
-
-
To me, it looks more like a "10n60" for the part number, which would be a 10 Amp, 600V MOSFET. And these come in TO-220 case, so I think that's more likely to be the part, like this:
https://www.unisonic.com.tw/uploadfi..._pdf/10n60.pdf
Of course, a 40 Amp MOSFET would probably work too and possibly even better... provided whatever is driving its Gate won't have issues with the higher Gate charge / currents.Comment
Related Topics
Collapse
-
by VoicE2000Hello all, Can anybody help me identifying this part its on the usb c line on a hp elite x2 ,Seem like a filter or cap ,or some sort of short or polarity protection.anyway its blown.
... -
by edugimenoHi There!
I'm trying to help my friend who owns a restaurant be just bought.
He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
It's stuck using, I guess, the 2 sided tape that comes with the strip
The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth... -
by G-StingSo My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?
i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something
SO My main concern is what part should i order what should i search the name for ?
on Ipad...4 Photos -
by jgustaHello, I am trying to identify a damaged component on a Miller d302K 3+12 Diesel Engine Driven Welder Voltage Regulator board. The board itself is labeled Assembly # 214954. The board is modular but can't find an easy replacement.
There is a component that is damaged that I cannot identify due to it being damaged. It is marked as Q2 on the board. I've included a link to the technical manual, but it doesn't give much detail, at least none that I can understand.
Can anyone could help me identify this component? I've tried to get as good of a picture of it as I can.
...4 Photos -
by jojo2312Hello,
I'd like to replace this Part, but I don't know how to identify it so that I can order a replacement.
under a microscope it seems to State "|I5" or "|T5" .
Greetings...09-18-2024, 06:51 AM - Loading...
- No more items.
Comment