Is KT808AM compatible to 2SD867 ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • caspian
    Badcaps Legend
    • Oct 2015
    • 1591
    • Laptop
    #1

    Is KT808AM compatible to 2SD867 ?

    Dear members,

    I have a linear Desk variable power supply that has an old Russian Transistor with model KT808AM. It cannot be found any more.
    Is it right if I replace KT808AM by 2SD867 ?
    Are these two transistors fully compatible according to their specifications and properties?

    Regards
    Last edited by caspian; 12-30-2023, 10:47 PM.
    Tags: None
    • PeteS in CA
      Badcaps Legend
      • Aug 2005
      • 3581
      • USA, Unsure of Planet
      #2
      They look compatible, if the package is the same:

      https://alltransistors.com/transisto...ansistor=39155

      https://html.alldatasheet.com/html-p.../1/2SD867.html
      PeteS in CA

      Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
      ****************************
      To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
      ****************************

        Comment

        Previous template Next

        Related Topics

        Collapse
        • NotEnough
          Dell G15 5515 RGB Keyboard Not Detected (Compatible Keyboard, Possible BIOS/EC Issue?)
          by NotEnough
          Hi everyone,



          I'm working on a Dell G15 5515 (Ryzen 7 5800H, RTX 3050 Ti) and recently installed a compatible 4-zone RGB keyboard and controller (for Dell G15 5510/5511/5515 models). While the keyboard functions for typing, the RGB lighting is not detected by Alienware Command Center (AWCC), which displays “No AlienFX devices found.”



          What I've Tried So Far:
          • Reseated the cables.
          • Reinstalled AWCC and AlienFX services.
          • Attempted BIOS downgrade but no improvement.
          • Inspected ribbon cables for damage.
          • Explored the possibility of BIOS or
          ...
          10-19-2024, 01:34 AM
        • davidebeatrici
          Asus X541UV Windows update KB5063060 deleting BootOrder EFI environment variable? bios fix
          by davidebeatrici
          I had 3 people contact me in a week because Windows suddenly didn't boot:



          As you can see, all 3 are ASUS computers, but I believe the common factor is the BIOS being American Megatrends (AMIBIOS/APTIO).

          The first two recovered just fine after a restart, but the third one didn't and was brought to me. The model is F541UV (X541UV).
          Setup allows to add a boot option manually and the operating system boots just fine from both bootx64.efi and bootmgr.efi. However, there is no way whatsoever to save the option(s): upon a reboot the machine goes straight...
          06-17-2025, 12:59 PM
        • Deby
          List of compatible laptop motherboards
          by Deby

          This is a list of compatible laptop motherboard information that I have been collecting for some time.
          And it's still ongoing.
          Every time I come across information that a board is compatible with another, I write it down.
          Anyone who wants to, can continue to expand the list.
          Packed in the rar, is an excel table that has additional information.
          Motherboards.rar...
          05-31-2024, 04:34 AM
        • m4a2t0t
          BD35231 compatible replacement
          by m4a2t0t
          Anyone know of a compatible replacement that has an adjustable output? The BD35230 has a fixed output of 1.0V and would be acceptable but I cannot find it anywhere. There is also the BD3523 which has an adjustable output but its also nowhere to be found. I could probably source them from alibaba but I dont have that much time and I dont want to make a huge order.

          Or perhaps you know how the BD35231 can be modified to output 0.95-1.0V? The board does have empty pads for an adjustable IC but Ive only been able to make the output go up.

          Thanks for any help...
          08-28-2025, 08:32 PM
        • taurtnt
          Help identifying AMCH073 regulator or finding a compatible replacement
          by taurtnt
          Hi everyone,
          I’m trying to identify a step-down regulator marked AMCH073. It’s used on the PEX power rail of a graphics card. I can’t find any datasheet or info online.
          Here’s what I’ve observed:
          • It has a QFN-16 footprint, similar to NB670.
          • Pins 1, 2, 15, 16 are connected together and go to the inductor, so likely SW (switch node).
          • Pin 9 is connected to GND, which doesn’t match NB670 (where pin 9 is SW).
          • Pin 8 also seems to be tied to the same GND plane.
          • The chip only says AMCH073, no manufacturer logo or other markings....
          1 Photo
          08-24-2025, 03:06 PM
        • Loading...
        • No more items.
        Working...