Schottky Diode IDT08S60C open when I repaired the Samsung plasma HP-S5053 power supply board PSPF501A01A, this is a 600V 8A diode, hard to find the same part number. Any idea to replace with other diode ?
Attached Files
-
-
Re: Schottky Diode IDT08S60C
IDH08S60C they have them at newark here is the url
http://www.newark.com/infineon/idh08...-to/dp/22T5136
i checked mouser and they are out of stock and digikey wants you to order atleast 500! newark is the only 1 that i saw allows you to order just 1 but those are the only places i checked! here is the page for infineon of some of their discontinued products yours is in there you can check it out if you want here it is.
https://cdn.badcaps-static.com/pdfs/...247b3ac15e.pdf
discontinued
IDT08S60C
SP000080226
PG-TO220-2-2
600V
new replacement
IDH08S60C
SP000657994
PG-TO220-2-1
600V -
Re: Schottky Diode IDT08S60C
datasheet is here
http://www.alldatasheet.com/datashee...IDH08S60C.html
Comment
-
Hi there, i am currently diagnosing my corsair rm750 that wont turn on, after a power trip.
Before the power trip, previously i need to push power button on my pc case quite a bit in order to turn the pc (and power supply on), however after the power trip now i cannot turn the pc on at all and i opened the power supply, and found out some of the component(s) are blown. (picture attached)
My current diagnostic is that the (schottky) diode marked "SF" in the 5Vsb circuit are blown and possibly the ES1DF diode too.
Can anyone help me identify the component... -
Hello, I am looking for help to replace a damaged diode. The tristar was replaced and a diode was damaged in the process. I have a picture of the diode but dont have an exact donor. I mostly have macbooks for donors and only a few ipad and iphone boards. Diode part number: DSF01S30SCAP
Im not sure where to find the ipad board number. Anybody have an idea where else this diode is used on other boards? Thanks.... -
Hello everyone, I'm repairing an LG TV backlight and I noticed some strange behavior when I touching the backlight strip with a missing Zener diode.
So I replaced the leds on the strips and they seemingly working fine, but soon as I touch the strip which has a missing Zener diode the whole backlight turns off for a few seconds and then turns back on.
Is this caused by the missing diode? If so what kind of zener diode should I use to replace it?.
The led strips has 9 6V leds.
-
Hello everybody☺️ I am glad to be here and looking forward to a good discussion.
First of all, I am new here. Therefore I will shortly introduce myself.
I am Nico and currently I study Physics.
In my freetime I like to build and repair stuff. Especially big battery's.
A few years ago I got myself an electric unicycle, monowheel or however you call that.
The battery bms was broken so I replaced and resolder that. Nothing big.
I used this thing for some years and had a lot of fun. Unfortunately I used it last time in heavy rain. Usually everything... -
Hello Everyone,
I have 1 diode on a circuit that I suspected to be faulty because the forward and reverse bias has a voltage drop reading.
While compared to the reading of another diode from the next channel it won't read at reverse bias.
Now the problem is; it does not have any body marking.
So I tried to sketch the diagram and found out that it is connected to the base and collector of the C3632 transistor.
What do you think is this diode?
Can you please suggest what part number can i use to replace this faulty diode instead?
Hoping that you...
Comment