The PSU in the pics is an ICAN DR-8500BTX Rated at 500W.
It uses the ERL-35 Transformer and the Primary Mosfets are large, labelled 13009. I suspect the real rating is less than 350 watt.
I would like to enhance the primary filtering, as you can see I have already yanked out the Asia-X caps and substituted UCC KY and Panasonic WG.
I have included a pic of the Primary filtering on the SH250 PSU which also uses ERL-35, for comparison, and a pic of an X2 cap I liberated from another PSU that I hope to use in this one.
If someone can suggest the missing filter elements and where they should go it would be great.
Thanks in advance
It uses the ERL-35 Transformer and the Primary Mosfets are large, labelled 13009. I suspect the real rating is less than 350 watt.
I would like to enhance the primary filtering, as you can see I have already yanked out the Asia-X caps and substituted UCC KY and Panasonic WG.
I have included a pic of the Primary filtering on the SH250 PSU which also uses ERL-35, for comparison, and a pic of an X2 cap I liberated from another PSU that I hope to use in this one.
If someone can suggest the missing filter elements and where they should go it would be great.
Thanks in advance
Comment