Hi, I have a Reebok treadmill PSU SW01-CA-REV1.0 (KSW13) that's blown, I can identify most parts but have diode D7 and chip capacitor C8 that have burnt out and are unidentifiable - does anyone have a schematic or a PCB they can identify the parts from?
Reebok treadmill PSU SW01-CA-REV1.0 blown
Collapse
X
-
Re: Reebok treadmill PSU SW01-CA-REV1.0 blown
you need to remove the relays and the polyester and electrolytic cap and get rid of the rest of the carbon
also the cap may have leaked and caused the arc
the diode is probably just a regular rectifier like a UF4007 feeding power to the chip from the aux winding of the transformer
Related Topics
Collapse
-
by LaptopSugarPlease identify the broken blown component. The pictures and schrmatic are attached. The 5 pin nextdoor refers to the dc cable. I think iy is the 1000p 50 0603 v7 cap but im not sure. Am i correct. the images are attached pleas help
The images followthe first is thebroken conponent, rhe second another board, the third the schematic, idought itsthe yello highlighted one on left... -
by SuperfurryHi all,
I was after some advice if possible please. I bought a second hand Reebok ZR7. It was working fine but all of a sudden it just won't start. The Console is on - time/calories and speed/distance say 0:00 as usual, but the Pulse says 'P-0'. When I press start nothing happens anymore, no countdown to start, etc.
I spoke to the people we bought it off and they said they never had any issues and hardly used it. It's 3 years old.
I phoned Reebok who sent me a new motor control board - that made no difference, so they have sent me a console, but I...06-29-2023, 05:43 AM -
by hasefrochHello everyone, I got this notebook, mainboard SKITTL10-6050A273001-MB-A1
Saw the U6100 blown up, so didn't even try to power it up.
Sems that there is not a schematic or boardview of this one, so I attached some pictures (some look distorted; the ic looks like a qfn-16 3x3).
Maybe is the RT2790A; looks to me compatible but their product code is 3B= XX and mine is 38=
Hope someone knows this one.
Thanks in advance.4 Photos -
by vic1234Hello
I have I Intel nuc D34010WYB with a blown power mosfet and i cant find a photo of what mosfet was there
is anyone know?
2 Photos11-30-2023, 02:42 PM -
by G0RITGood evening I am working on a Reebok oneGT40s treadmill. It had a flashing display which the replacement of D3 rectified. However the lift motor now runs when the mains is turned on and does not stop. If I then select start so the tread motor runs and disconnect the up lead to the lift motor it stops. If I then reconnect the lead the lift motor works as it should with the controls. It will continue to work correctly until the mains is turned off and on again, or the safety device is removed and replaced. It then runs again and only by disconnecting and reconnecting the up lead will it operate...
- Loading...
- No more items.
Comment