Hedwig-6050a2993001-mb-a03
Hi guys can you please help me, I needed a schematic diagram and board viewer for HEDWIG-6050A2993001-MB-A03. This for HP 14S CF2041TU. Thanks in advance
pyrojack2001
pyrojack2001
-
-
Re: HEDWIG-6050A2993001-MB-A03 HP 14S CF2041TU
Hi guys can you please help me, I needed a schematic diagram and board viewer for HEDWIG-6050A2993001-MB-A03. This for HP 14S CF2041TU. Thanks in advance
pyrojack2001 -
help schematic HP 14S CF2041TU
anyone has schematic of
HEDWIG-6050A2993001-MB-A03 HP 14S CF2041TUComment
-
Anyone with schematic for 6050A2993001-MB-A03
Please anyone with the schematic diagram for
Mobo number
6050A2993001-MB-A03Comment
-
Re: Anyone with schematic for 6050A2993001-MB-A03
Still waiting for reply to help me with schematic and board viewerComment
-
Re: Hedwig-6050a2993001-mb-a03
What is the fault? Could not locate the requested files in my database.Comment
-
Re: Hedwig-6050a2993001-mb-a03
Hi mon2 it when you power. there is no display and the cap locks blinks 4 times. Hope you can help me. Thanks in advance.Comment
-
Re: Hedwig-6050a2993001-mb-a03
From the hp website:
Since we cannot locate a schematic, you will have to post pics of the board. You should start a fresh thread in the laptop forum regarding this laptop.The Diagnostic LED blinks red 4 times (once per second), then a 2-second pause follows, and then it beeps 4 times:
This indicates power failure.
Then, review where the power adapter enters the logic board. In this area will be 2*DCin mosfets and the charger IC. The charger IC will be a black square device. We need to know the topside markings of the IC.
Often, HP will use charger ICs with 'BQ' markings from Texas Instruments.
Post pics.Comment
-
Re: Hedwig-6050a2993001-mb-a03
Thanks Mon2 will update if I ever find the defective component.Comment
-
I'm also looking for schematic or board view of this board.. encountered a problem 5 long 3 shorts, i already flash bios via keyboard PC run for several days and return to 5 blinks and 3 shorts. I tried replacing the memory, check and soldered ram slot pins - no luck, I also clear ME and flash bios and using CH431a programmer still no luck.
TIA
Comment
-
Help me this MB Schematic HEDWIG-6050A2993001-MB-A03Comment
-
Hi friends, anyone to assist with the schematic diagram and boardview for dell latitude 5289 with board number CAZ LA-E111P.... -
please i need schematic for HP CQ61
mobo number DA00P8MB6D1 REV
-
I have a Yorkville Audiopro 208 Performance Mixer (full name on device - 8 channels, non-powered). Not only can I not locate schematics for this, I cannot find a user manual, a picture or any reference whatsoever to this mixer on the entire internet and I have looked really hard. Not a single mention anywhere. It's like it never existed, yet it does. I have been sourcing schematics for decades but have never run into to this before. In this day and age, how is this even possible?
It appears to have the same mixer stage as the Audiopro model 508 but this unit has a built in power...07-05-2023, 01:41 PM -
Hello, Guys.
i have been reading some forum messages here reguarding absolute persistance.
I have a laptop i bought a while back and just noticed it has been enabled & activated on this machine. I have contacted absolute persistance and they have confirmed it's not reported stolen (proof will be attached)
To get this removed the process can take upto several months and i have seen here you guys can modify the bios file?
im quite green when it comes to this kind of thing and hope you guys can help me.
on some posts i have read... -
Hello Everyone Please bear with me as I'm not very experienced in electronics and board repair but I think with a little help from you experienced guys I can get this done. I do have a tech background and I believe I have all the needed equipment to complete the task at hand.
A week ago my MSI GS76 STEALTH 11UG (board MS-17M11) No easy way to say this I think I may have killed my baby. What had happened was My ALFA External Wifi was not being recognized because it needed more power than my machine could output. After researching the issue I found out that using a powered USB hub...
Comment