I have an apple watch series 1 38mm that don't power on it displays the apple logo then off. any leads??
Apple Watch Series 1 A1553 SCH??
Collapse
X
-
Tags: None
-
Re: Apple Watch Series 1 A1553 SCH??
Force restart your Apple Watch
https://support.apple.com/en-us/HT204510 -
Re: Apple Watch Series 1 A1553 SCH??
done that, thats when it turned on a apple logo few seconds then off. it shows a spiral battery low bat screen when it drain the battery. the battery is new.Comment
Related Topics
Collapse
-
by a_p3rsonHi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...-
Channel: Schematic Requests ONLY!
04-21-2025, 11:41 PM -
-
by Nash99Hi everyone
Does anyone know what this circuit does on the Apple Watch Series 5 44mm taptic engine? I have attached a picture.
Whilst working on it, the connector (picture attached) broke off, does anyone know what it is for? Any tips on repairing it?
The circuit is also just stuck down with a little glue and is not part of the taptic engine's functioning.
The Apple Watch Series 5 44mm is GPS only and not GPS and cellular.
Thank you!... -
by techfix1982Hi does anyone know or have apple watch series 3 firmware 8.3 ispw for restore using sfder ibus.
Thanks Ash05-14-2022, 04:42 AM -
by G33RTPhilips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.
It does power up when pressing the power button.
I already try the power button while plugin the plug with no result.
Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.
Could this be an PSU or eMMC issue ? -
This specification for the ASUS Pro Series D310MT-0G32500650 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Pro Series D310MT-0G32500650 boardview and Pro Series D310MT-0G32500650 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-12-2024, 03:28 PM
- Loading...
- No more items.
Comment