DELL XPS LA-G172P schematic BRD request

[nivirus2000]

Hello. I'll appreciate if someone can share schematic and board view for Dell XPS 13 G172P Schematic or boardview.

Thank 😊

[satishkumar]

Re: DELL XPS G172p schematic BRD request

hello. I'll appreciate if someone can share schematic and board view for dell xps 13 g172p schematic or boardview.

Thank 😊

[horsebatterystaple]

Dell XPS 13 7390 (2-in-1 Variant) Schematic/BoardView

Hi all,

VERY new to this. Wondering if anyone has a schematic to a Dell XPS 13 7390. Looking specifically for the 2-in-1 version-- apparently even though it shares the same name/model number at Dell, the XPS 13 and XPS 13 2-in-1 are totally different computers (with totally different boards).

On some shady sites, I've seen the following info on it.

Manufacturer: Compal
Model: Centenario (DDP31)
PCB: LA-G172P

Any help is appreciated.

[horsebatterystaple]

Re: Dell XPS 13 7390 (2-in-1 Variant) Schematic/BoardView

Tried searching a by PCB number and found another thread with these files. Sorry for the double post.

https://www.badcaps.net/forum/showthread.php?t=106805

[longccs]

Re: DELL XPS LA-G172P schematic BRD request

thank you very much

[MicroSMD Lab]

Re: DELL XPS LA-G172P schematic BRD request

I'm hoping to use this to repair a Dell XPS 13 9310. What software can I use to open the board view file? I already tried boardviewer and openboardview with no success, TIA

[hnim26]

Re: DELL XPS LA-G172P schematic BRD request

Thank you.

[elsid80]

XPS 13 7390 2-in-1.

at #horsebatterystaple

hi there ! i have the same laptop , same board . mine wont turn on after a liquid drop...can you please sent me or where i can get the correct .brd file because the one i have , i wasnt able to run it....( Compal LA-G172P Rev1.0 Boardview(brd).brd , about 40mb )

thank you !!

[elsid80]

Re: DELL XPS LA-G172P schematic BRD request

yea ! count me in for that software...i need it too!,boardview cant open that file....

thank you guys..!!!

[ntttechnik]

Thank you.

[pc_okay]

XPS 13 7390 2-in-1.

at #horsebatterystaple

hi there ! i have the same laptop , same board . mine wont turn on after a liquid drop...can you please sent me or where i can get the correct .brd file because the one i have , i wasnt able to run it....( Compal LA-G172P Rev1.0 Boardview(brd).brd , about 40mb )

thank you !!

Hello, this post is quite old, but it could be usefull for other people...
To open the boardview you need Allegro/OrCAD/SIP/MCM FREE Physical Viewers 16.6 - 15MB.
Good luck with that soft, really not user friendly!

https://www.cadence.com/ko_KR/home/t...ads-start.html

[francisew]

FYI, the older Allegro .brd file cannot be opened in the newer Cadence/Allegro free viewer version 24.x. The version 16.x board files need to be converted with dbdoctor... but that is no longer included with the Free Physical Viewer tools. The Cadence support people indicate that a trial of the latest web based version should work, but other people report on the Cadence forums that many board files fail in the upgrade process.

I found a web site that is hosting an older version (17.2) of the Allegro free physical viewer tool:
https://alspcb.com/resources/

I can confirm that the XPS 13 2-in-1 board file LA-G172P board files can be opened in that version (17.2-2016):

Hello, this post is quite old, but it could be usefull for other people...
To open the boardview you need Allegro/OrCAD/SIP/MCM FREE Physical Viewers 16.6 - 15MB.
Good luck with that soft, really not user friendly!

https://www.cadence.com/ko_KR/home/t...ads-start.html

[tarek5313]

FYI, the older Allegro .brd file cannot be opened in the newer Cadence/Allegro free viewer version 24.x. The version 16.x board files need to be converted with dbdoctor... but that is no longer included with the Free Physical Viewer tools. The Cadence support people indicate that a trial of the latest web based version should work, but other people report on the Cadence forums that many board files fail in the upgrade process.

I found a web site that is hosting an older version (17.2) of the Allegro free physical viewer tool:
https://alspcb.com/resources/

I can confirm that the XPS 13 2-in-1 board file LA-G172P board files can be opened in that version (17.2-2016):

here is the real deal, enjoy everyone
if you have similar case i can convert for you, free ofcourse

[noname2024]

here is the real deal, enjoy everyone
if you have similar case i can convert for you, free ofcourse

try this file cad with bomfile

[francisew]

You guys are awesome! Thanks!

[francisew]

By the way, for reference I have compiled a bunch of information about this model in a post asking for the bios:

https://www.badcaps.net/forum/troubl...72#post3718772