Please help me to get schematic or boardview for said model. Or any similar one. thank you in advance.
-
-
Re: Nm-c821
Here friend. -
Re: Nm-c821
thanksComment
-
Lenovo IdeaPad 3-15ADA05 - LCFC NM-C821 Schematic
Hi all, does anyone have the Schematic + Boardview for Lenovo IdeaPad 3-15ADA05 - LCFC NM-C821
Best RegardsComment
-
Re: Lenovo IdeaPad 3-15ADA05 - LCFC NM-C821 Schematic
Search the forumAttached FilesComment
-
-
Re: Nm-c821
Thank YouComment
-
Thanks!!!Comment
-
THANK YOU VERY MUCH
]Comment
-
Hi everyone,
I'm working on a Dell G15 5515 (Ryzen 7 5800H, RTX 3050 Ti) and recently installed a compatible 4-zone RGB keyboard and controller (for Dell G15 5510/5511/5515 models). While the keyboard functions for typing, the RGB lighting is not detected by Alienware Command Center (AWCC), which displays “No AlienFX devices found.”
What I've Tried So Far:- Reseated the cables.
- Reinstalled AWCC and AlienFX services.
- Attempted BIOS downgrade but no improvement.
- Inspected ribbon cables for damage.
- Explored the possibility of BIOS or
-
Hi all,
Wife has 2 Philips hair curling irons half defective - after learning how they're supposed to work and testing them, it turned out that both have defective power cables, and both on the same place; broken wires due to wire bending.
As they were both relatively easy to disassemble, and cables are plugged not soldered (as they can rotate in the handle), I was sure it would be easy to find replacements. But - NO! I'm unable to find anything similar on ebay or Aliexpress.
Not sure if this is something Philips proprietary, or a standard, but the cable plug... -
I am trying to fix audio issues on a lenovo slim 7 pro im trying to repair, Has some issues with audio (sound only from bottom speakers, no sound from headphone (static) or palmrest speakers)and am looking for a schematic to troubleshoot, I suspect its something to do with the realtek ALC3306 chip, or unclean power to it.So a schematic would be useful, or any schematic utilizing the ALC3066 in a similar configuration, (2bass, 2 treble channels)
-
hi i want to unlock my advance setting on my 100-14lbd laptop hope you can help me... -
Patient is a Maytag/Whirlpool/Kenmore clothes dryer. Not sure of exact model, doesn't matter. All boards are out of production.
Specific problem is a Maytag 8544799 / WP8544799 motor-control board, aka Diehl Controls 708879-05. Customer states the board "doesn't work, motor doesn't run". Not sure how the repairman made that assessment, or if it's even accurate. He can't get replacement boards, and the owner decided to buy a new dryer, so whether this board is the problem is speculation on his part. Again, doesn't matter.
I've been over the board looking for...
Comment