nm-c711
nm-c711 schematic & boardview
Collapse
Related Topics
Collapse
-
by re-atariHello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at...-
Channel: BIOS & Schematic Requests!
-
-
by jonyhdtvHP ProBook X360 11 G3 ee (winbook) schematic and boardview thanks
Looking for schematic and boardview
Model: HP ProBook X360 11 G3 EE
Serial: SCG9114JG7
Motherboard: L43774-601
defect: touchscreen doesn't work (touch works on another computer)
thanks to all​-
Channel: Schematic Requests ONLY!
01-29-2025, 08:16 AM -
-
by jonyhdtvHP ProBook X360 11 G5 ee (winbook) schematic and boardview thanks
Looking for schematic and boardview
Model: HP ProBook X360 11 G5 EE
Serial: SCG0164QLH
Motherboard: L83950-601
defect: no POWER
thanks to all​-
Channel: Schematic Requests ONLY!
01-29-2025, 08:11 AM -
-
by wladek1986Hello. I have broken MB GIGABYTE GA-B85M-D3H rev 2.0.
Does anyone here have a electrical schematic or boardview ? Or best both of them
As electronic hobbys i'm trying to repair it but without schematic and boardview it's hard.-
Channel: BIOS & Schematic Requests!
-
-
by YagersMy motherboard has recently gone out. Seems to be something on the VSB circuits, which I was already suspicious as I went through 5 PSU's in 5 years, most of which had damaged VSB circuits, but It stopped working a week ago, I thought it was the PSU again, but a new one didn't remedy the no start, I walked away with it hooked up and came back in and it was on and running all on its own, shut it down and it wouldn't turn on again, after about 5 button presses it turned on and worked fine until this sunday, It wouldnt start, so I tried swapping psu's, I then noticed a slight whine, and noticed the...
-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment