Fe490/Fe590/FE480 NM-B911 Board
you can help me i need schematic for nm-b911
there is no current on the motherboard
there is no current on the motherboard
-
-
Re: Fe490/Fe590/FE480 NM-B911 Board
need the same!
-
-
-
Re: Fe490/Fe590/FE480 NM-B911 Board
Thaaaaaaanks AlotComment
-
Re: Fe490/Fe590/FE480 NM-B911 Board
Thank you very very muchComment
-
Re: Fe490/Fe590/FE480 NM-B911 Board
Thank you very muchComment
-
thanks a lotComment
-
good
Comment
-
THAN JLU YOUYComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I have a Lenovo laptop with water damage, after fysical cleaning it works every day better.
One usb port is not working, no data, edit: seems hardware connection ) and system is sensitive sometimes it drops off after pluging u usb
stick or light touching the charger cable. But the last thing occurs less some how.
I noticed when doing a passmark benchmark the first time it scores good, doing one after it is much lower,
when waiting / cooling it is getting the same score again.
Some mosfets are getting "hot" while on load.
... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Comment