Ipad Air 3 10.5" A2152

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • phantom1
    Member
    • May 2018
    • 16
    • florida
    #1

    Ipad Air 3 10.5" A2152

    Thanks in advanced for any help on a schematic for this Ipad Air 3 10.5" A2152
    water damage no start pulled screen off had water damage on home button connector on the screen itself very little on MB clean for the most part tried powering up with out screen and watching amps it response to power button then i see mA start to ramp up to about .800mA up to maybe .900mA
    no shorts or hot spots looks good under thermo flir so I have a screen coming as i dont have any info to check anything on the MB thanks again for any help.
    ps.. Battery is ok as well 4.01 vdc
    Tags: None
    • kingskie
      Badcaps Veteran
      • Oct 2014
      • 249
      • indonesia
      #2
      Re: Ipad Air 3 10.5" A2152

      does anyone have this ipad air 3 schematic? i have a problem with have backlight but no display

        Comment

        • adriaanhendrik
          New Member
          • Dec 2023
          • 3
          • Netherlands
          #3
          Does anybody has a boardview file for the iPad air3 please. I have no backlight although it functions OK. I changed the two 3v backlight diodes but no success yet.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • ipatch
              ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
              by ipatch
              i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
              08-24-2024, 02:36 PM
            • GeirAndersen
              iPad .pcb file collection
              by GeirAndersen
              I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
              Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

              IPAD COLLECTION 1
              +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
              +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
              +---iPad mini3 820-00008(A1599) 820-00002(A1600)
              +---iPad mini4 820-00180(A1538) 820-00177(A1550)
              +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
              +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
              12-09-2024, 09:28 AM
            • SarcasticOP
              iPad Pro 12.9 (6th Gen) screen shuts off after unplugging device
              by SarcasticOP
              Greetings,

              I have an iPad Pro 12.9" 6th gen tablet that had a screen replaced about 10 months ago at a repair shop and last week the screen went blank during use. The device was still on, notifications played sound for example. I have replaced the screen twice, both screens are working until I unplug it, at which point I can see that screen is on but is all black. If I press the power button, the backlight goes off, and when I press it again, the image appears for half a second and then the screen goes back to being black but on. This issue is not present at all when the iPad...
              10-24-2024, 11:55 AM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • grimacelord
              Apple iPad Pro 3rd Generation 12.9" (A1876) No Power/Charge When Screen Is Connected
              by grimacelord
              Hello.

              Working on an Apple iPad Pro 3rd Generation 12.9" that has a weird issue. When the display is NOT connected, the iPad will charge and power on normally. I know it's on because I can hear notification sounds and the charging notification sound.

              If I connect a brand new display to the logic board, the iPad will not turn on at all. When I connect the iPad to an 18W wall charger and a USB-C ammeter, I can see that the iPad is attempting to charge, but constantly "resets" after just a moment or two.

              For example, when I connect the iPad to...
              04-15-2022, 11:06 AM
            • Loading...
            • No more items.
            Working...