Please If any friend have Schematic for HP 15-n027sl {U93 (DAOU93MB6DO)} Please share. Thanks
-
-
Re: Schematic for U93 (DAOU93MB6DO)
whats wrong with the board?Just cook it! It's already broken.Comment
-
Re: Schematic for U93 (DAOU93MB6DO)
I have two laps. One is no power, Other is no graphic supplyComment
-
Re: Schematic for U93 (DAOU93MB6DO)
MODEL - U93
Brand - HP
Mother board - DAOU93MB6DO
REV- DComment
-
Re: Schematic for U93 (DAOU93MB6DO)
Comment
-
I need hp compaq nx6310 schematic. friends can share if anyone has hp compaq nx6310 schematic? There is a sound problem, it does not detect the speaker. Headphones are working in the headphone socket. Thank you from now.
-
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.
Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.
After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,... -
Please, anyone cold share the board view and schematic with the GL702VS?
Thanks in advance!...
Comment