Dell_inspirion_n5050_DV15 HR DEAD need schematic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sanehdeep2012
    Senior Member
    • Oct 2013
    • 139
    • india

    #1

    Dell_inspirion_n5050_DV15 HR DEAD need schematic

    Dear friends I need the

    schematic
    board view
    BIOS DUMP

    for
    DELL INSPIRION N5050

    problem is dead,adaptor power is comming+5 AND +3also is ok power button is also working ok, but no power up

    board is

    DV15 HR
    48.41916.011

    CHIPSET IS = BD82HM67
    ANOTHER CHIP : NPCE795PAODX
    CORE i3 PROCESSOR
  • cyberhack
    Badcaps Veteran
    • Feb 2013
    • 466
    • Uk

    #2
    Re: Dell_inspirion_n5050_DV15 HR DEAD

    Here is the schematic I am looking for the bios
    Attached Files

    Comment

    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india

      #3
      Re: Dell_inspirion_n5050_DV15 HR DEAD

      Originally posted by egyeprom
      this is very common problem
      by mistake i but DELL V2520 bios 8mb 25q64 and the lap work fine but no detect the hdd
      so all thing is good already try io and step down 3 and 5 v ic all what you think i try expect change chip but it's open good at 8mb bios
      so any one solve this aware problem
      check signals from hub going to the hdd. Very likely Intel hm chip bad as this mb doesnt has a ec bios.

      Comment

      • emad2
        New Member
        • Oct 2015
        • 7
        • syria

        #4
        Re: Dell_inspirion_n5050_DV15 HR DEAD need schematic and bios

        think you

        Comment

        • abuonkga1979
          New Member
          • Apr 2022
          • 1
          • vietnam

          #5
          Re: Dell_inspirion_n5050_DV15 HR DEAD need schematic and bios

          please give me the Baordview (.brd or fz...) of the laptop
          Dell Inspiron 10316-1 DV15 HR 48.4IP16.011. Please help me.
          Last edited by SMDFlea; 04-10-2022, 01:09 PM. Reason: removed personal email address

          Comment

          Related Topics

          Collapse

          • jasonr2000
            Dell Inspiron All In One 7777 Dead :-( .Anybody have a Schematic
            by jasonr2000
            hi guys I have the above dell all in one pc.

            it was working fine then went dead as a dodo ive checked the PSU and its working perfectly fine

            it's using a brick PSU.

            does anybody have a Schematic or a board view of this machine ??


            the motherboard is model IPCFL-MG / KRJ4N / 0KRJ4N

            its an Inspiron All in One 7777

            any help is appreciated.

            thanks
            12-21-2022, 02:59 PM
          • double_DD
            How can I be sure that my EC chip is dead?
            by double_DD
            Hi all,

            As the title suggests, how can I be sure that my EC chip is really dead?

            I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

            Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
            03-12-2025, 07:47 AM
          • TinkerTron
            Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
            by TinkerTron
            Hey everyone,

            I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

            Instead, here's what's been bugging me so far:
            The schematic...
            03-06-2025, 02:03 PM
          • atunguyd
            Acer x163w Monitor PSU schematic
            by atunguyd
            Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
            The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
            03-05-2025, 02:08 PM
          • Thetechdude
            MSI Ventus RTX 4080 16G Broadview schematic needed
            by Thetechdude
            Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

            I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

            Thanks.
            07-15-2025, 11:15 AM
          • Loading...
          • No more items.
          Working...