guys can i see actual traces in BV or how to see it?
-
Hi everyone,
I recently bought a used PS4 and discovered that the power button is broken. Upon closer inspection, I found that the traces for the power button on the PCB are damaged and torn.
Does anyone know where these traces lead or have any advice on how to repair them?
Thanks in advance for your help!... -
hey guys I need a bios for 6-77-NP50PNJY-D02B-3C.With the current one, the laptop does not start. I am also attaching the original bios. Thank you!... -
Hey Guys I've got XPS 9570 with a blown isl chip that caused a lot of damage and I'm kinda having a tough time fixing it. I tried using 0.10mm wire to rebuild the traces but they ended up not taking solder very well making it difficult to solder the chip on with hot air.Any advice on how to rebuild solid nice traces? Many thanks ...
-
This is an lcd display used on ebikes.
long story short, there was condensation inside the unit.
I opened it and thoroughly cleaned the pcb with isopryl.
The board had no visible corosion.
It powered on fine and was tested for an hour or so.
However when connected to the bike,,it did not power on at all.
I took it home and reopened it to take a look. There are no shorts based on MY testing.
However,,when I probe the transistor and the mosfet gate in diode mode or contuinity mode, (one probe on transistor collector and one probe on mosfet gate}the unit...09-16-2025, 12:56 PM -
Guys i have water spilled this MSI MS-15841 and i need boardview and schematic to repair traces and components